LAISACBR600RR 2007
Track: Indianapolis Motor Speedway
← Back to Indianapolis Motor SpeedwayTaken over from the track: Asphalt · Technical · Tight · dry
Honda CBR600RR 2007 - 75 kg, Intermediate, Neutral, Indianapolis Motor Speedway
Set this first
Fork: Compression
- Stock value
- 2 clicks
- Recommended
- 5 clicks
- Change
- 3 clicks softer than stock
clicks out from fully closed
Reason: condition Indianapolis Motor Speedway
How to test it: Change Compression only, nothing else. Then ride the same section or the same number of laps as before and watch whether exactly the behaviour that bothers you changes. If it gets worse or less settled, put the value back.
- Fork: Compression5 clicks3 clicks softer than stockcomputed
- Fork: Rebound4 clicks1.5 clicks softer than stockcomputed
- Shock: Rebound1 turn0.25 turns softer than stockcomputed
- Shock: Compression22.75 turns0.75 turns softer than stockcomputed
- Transmission: Rear sprocket43 teeth1 tooth more than stockcomputed
14 confirmed settings available.
Released reference setup, editorially reviewed · Moderately documented
Referenced (not linked):- Honda CBR600RR (PC40) owner's manual standard cold tyre pressure (250/290 kPa) + OEM stock gearing (16/42, 525)
Last reviewed: 29 Jul 2026
A starting point to verify on the bike - not a safety guarantee. Change one thing at a time and check on track. How LAISA derives this →
All recommended changes
In order, biggest deviation from the stock value first. Take them one at a time.
- Fork: Compression3 clicks softer than stock
2 clicks5 clicksclicks out from fully closed
Reason: condition Indianapolis Motor Speedway
How to test it
Change Compression only, nothing else. Then ride the same section or the same number of laps as before and watch whether exactly the behaviour that bothers you changes. If it gets worse or less settled, put the value back.
- Fork: Rebound1.5 clicks softer than stock
2.5 clicks4 clicksclicks out from fully closed
Reason: condition Indianapolis Motor Speedway
How to test it
Change Rebound only, nothing else. Then ride the same section or the same number of laps as before and watch whether exactly the behaviour that bothers you changes. If it gets worse or less settled, put the value back.
- Shock: Rebound0.25 turns softer than stock
0.75 turns1 turnclicks out from fully closed
Reason: condition Indianapolis Motor Speedway
How to test it
Change Rebound only, nothing else. Then ride the same section or the same number of laps as before and watch whether exactly the behaviour that bothers you changes. If it gets worse or less settled, put the value back.
- Shock: Compression0.75 turns softer than stock
22 turns22.75 turnsclicks out from fully closed
Reason: condition Indianapolis Motor Speedway
How to test it
Change Compression only, nothing else. Then ride the same section or the same number of laps as before and watch whether exactly the behaviour that bothers you changes. If it gets worse or less settled, put the value back.
- Transmission: Rear sprocket1 tooth more than stock
42 teeth43 teeth
Reason: condition Indianapolis Motor Speedway
How to test it
Change Rear sprocket only, nothing else. Then ride the same section or the same number of laps as before and watch whether exactly the behaviour that bothers you changes. If it gets worse or less settled, put the value back.
All technical values
Complete settings, technical data, components, gearing and geometry - including the adjusters that exist on the bike but do not carry a confirmed value yet.
| BrakeOEM Radial 4-Piston Caliper | ||
| ChainOEM Chain | ||
| Chain length | 108 links | OEM |
| ChassisOEM Aluminium HFDC Twin-Spar Frame (CBR-RR 2007-2008) | ||
| ClutchOEM Wet Multiplate Clutch | ||
| ECUOEM Engine Management | ||
| ForkShowa 41 mm Inverted HMAS Cartridge Fork | ||
| Compressionclicks out from fully closed | 5 clicks▲ +3 | computed |
| Preload | 4.5 mm | OEM |
| Reboundclicks out from fully closed | 4 clicks▲ +1.5 | computed |
| Spring rate | 9.8 N/mm | OEM |
| HandlebarOEM Handlebar | ||
| ShockShowa Unit Pro-Link Monoshock | ||
| Sagloaded, rider in gear | 30 mm | OEM |
| Compressionclicks out from fully closed | 22.75 turns▲ +0.75 | computed |
| Preload | 2 mm | OEM |
| Reboundclicks out from fully closed | 1 turn▲ +0.25 | computed |
| Spring rate | 108 N/mm | OEM |
| SwingarmOEM Aluminium Swingarm | ||
| TireOEM Sport Tire | ||
| Front tire pressure | 2.5 bar (36.26 psi) | OEM |
| Rear tire pressure | 2.9 bar (42.06 psi) | OEM |
| TransmissionOEM Final Drive | ||
| Front sprocket | 16 teeth | OEM |
| Rear sprocket | 43 teeth▲ +1 | computed |
After the ride
Tested a change? Record what happened. LAISA stores it against this bike and this condition. The recommendation above does not adapt to it automatically yet.
About this baseline
For a 75 kg Intermediate rider with a Neutral style, the baseline for the Honda CBR600RR 2007 at Indianapolis Motor Speedway shifts 5 of 14 computed settings away from the OEM standard. The biggest shifts: Compression 5 clicks (+3 vs OEM), Rebound 4 clicks (+1,5 vs OEM). All values are computed from OEM defaults and your rider and condition factors.
Value provenance: OEM = manufacturer specification · verified = confirmed by an expert · reviewed = editorially reviewed reference · community = confirmed by the community (median of at least three public setups) · computed = automatically derived by the LAISA engine. Automatically extracted and unconfirmed values never appear on public pages.
Next steps
Dial in your riding technique
Skills that change how the bike behaves - often the real fix before any clicker.
Explore techniqueMatching protective gear
The right setup is half the job - the other half is protective gear matched to the discipline and conditions.
Gear for these conditionsUpgrades that fit
Optional aftermarket parts for this bike - the setup above comes first, these are next.
Setups for this bike
1 setupsReference setups
Verified factory and expert setups.Related
Similar bikes
Matching tracks
Frequently asked questions
How much race sag for the Honda CBR600RR 2007?
As a starting point, 30 mm of race sag at 75 kg rider weight. Measure with a helper and set it via spring preload.
What tire pressure is recommended for the Honda CBR600RR 2007?
As a starting point: 2.5 bar front, 2.9 bar rear - computed for a 75 kg Intermediate rider. Check cold and adjust in small steps by feel.
What gearing (sprockets) does the Honda CBR600RR 2007 run?
As a starting point, 16 teeth front / 43 teeth rear. For more acceleration go larger at the rear (or smaller at the front); for more top speed, the reverse.
Are these values safe to ride?
Baseline values are starting points generated from OEM defaults, rider weight, skill, style and conditions - not safety guarantees. Verify on the bike, adjust step by step and ride within your limits.
Baseline values are starting points generated from OEM defaults, rider weight, skill, style, and condition - or lifted from an expert/verified setup where one exists (see the provenance badge). They are not safety guarantees. Verify on the bike and ride within your limits.