LAISANinja ZX-6R 2009
Track: Automotodrom Grobnik (Rijeka)
← Back to Automotodrom Grobnik (Rijeka)Taken over from the track: Asphalt · dry
Kawasaki Ninja ZX-6R 2009 - 75 kg, Intermediate, Neutral, Automotodrom Grobnik (Rijeka)
Set this first
For this profile the bike stays on its stock values. There is nothing to change - check the values below against the bike.
Key values- Shock: Sag30 mmOEM
- Shock: Low-speed compression3 turnsOEM
- Shock: Rebound15 turnsOEM
- Fork: Compression0.5 turnsOEM
- Fork: Rebound4 turnsOEM
15 confirmed settings available.
Released reference setup, editorially reviewed · Moderately documented
Referenced (not linked):- Kawasaki Ninja ZX-6R 2009 owner's manual standard tyre pressure + OEM gearing (16/43) (2009)
Last reviewed: 29 Jul 2026
A starting point to verify on the bike - not a safety guarantee. Change one thing at a time and check on track. How LAISA derives this →
All technical values
Complete settings, technical data, components, gearing and geometry - including the adjusters that exist on the bike but do not carry a confirmed value yet.
| BrakeOEM Radial 4-Piston Caliper | ||
| ChainOEM Chain | ||
| Chain length | 110 links | OEM |
| ChassisOEM Aluminium Perimeter Frame (ZX 2008-2009) | ||
| ClutchOEM Wet Multiplate Clutch | ||
| ECUOEM Engine Management | ||
| ForkShowa Big Piston Fork 41 mm | ||
| Compressionclicks out from fully closed | 0.5 turns | OEM |
| Preload | 4 turns | OEM |
| Reboundclicks out from fully closed | 4 turns | OEM |
| Spring rate | 9.3 N/mm | OEM |
| HandlebarOEM Handlebar | ||
| ShockShowa Bottom-Link Uni-Trak Shock | ||
| Sagloaded, rider in gear | 30 mm | OEM |
| High-speed compressionclicks out from fully closed | 3 turns | OEM |
| Low-speed compressionclicks out from fully closed | 3 turns | OEM |
| Preload | 179 mm | OEM |
| Reboundclicks out from fully closed | 15 turns | OEM |
| Spring rate | 98 N/mm | OEM |
| SwingarmOEM Aluminium Swingarm | ||
| TireBridgestone Battlax BT-016 | ||
| Front tire pressure | 2.5 bar (36.26 psi) | OEM |
| Rear tire pressure | 2.9 bar (42.06 psi) | OEM |
| TransmissionOEM Final Drive | ||
| Front sprocket | 15 teeth | OEM |
| Rear sprocket | 43 teeth | OEM |
After the ride
Tested a change? Record what happened. LAISA stores it against this bike and this condition. The recommendation above does not adapt to it automatically yet.
About this baseline
For a 75 kg Intermediate rider with a Neutral style, the baseline for the Kawasaki Ninja ZX-6R 2009 at Automotodrom Grobnik (Rijeka) shifts none of the 15 computed settings away from the OEM standard. All values are computed from OEM defaults and your rider and condition factors.
Value provenance: OEM = manufacturer specification · verified = confirmed by an expert · reviewed = editorially reviewed reference · community = confirmed by the community (median of at least three public setups) · computed = automatically derived by the LAISA engine. Automatically extracted and unconfirmed values never appear on public pages.
Next steps
Dial in your riding technique
Skills that change how the bike behaves - often the real fix before any clicker.
Explore techniqueMatching protective gear
The right setup is half the job - the other half is protective gear matched to the discipline and conditions.
Gear for these conditionsUpgrades that fit
Optional aftermarket parts for this bike - the setup above comes first, these are next.
Setups for this bike
1 setupsReference setups
Verified factory and expert setups.Related
Similar bikes
Matching tracks
Frequently asked questions
How much race sag for the Kawasaki Ninja ZX-6R 2009?
As a starting point, 30 mm of race sag at 75 kg rider weight. Measure with a helper and set it via spring preload.
What tire pressure is recommended for the Kawasaki Ninja ZX-6R 2009?
As a starting point: 2.5 bar front, 2.9 bar rear - computed for a 75 kg Intermediate rider. Check cold and adjust in small steps by feel.
What gearing (sprockets) does the Kawasaki Ninja ZX-6R 2009 run?
As a starting point, 15 teeth front / 43 teeth rear. For more acceleration go larger at the rear (or smaller at the front); for more top speed, the reverse.
Are these values safe to ride?
Baseline values are starting points generated from OEM defaults, rider weight, skill, style and conditions - not safety guarantees. Verify on the bike, adjust step by step and ride within your limits.
Baseline values are starting points generated from OEM defaults, rider weight, skill, style, and condition - or lifted from an expert/verified setup where one exists (see the provenance badge). They are not safety guarantees. Verify on the bike and ride within your limits.