LAISARR 350 4T 2025
Track: Enduro de Vertolaye
← Back to Enduro de VertolayeTaken over from the track: Loam · Technical · Fast · wet
Beta RR 350 4T 2025 - 75 kg, Intermediate, Neutral, Enduro de Vertolaye
Set this first
Fork: Rebound
- Stock value
- 11 clicks
- Recommended
- 13 clicks
- Change
- 2 clicks softer than stock
clicks out from fully closed
Reason: condition Enduro de Vertolaye
How to test it: Change Rebound only, nothing else. Then ride the same section or the same number of laps as before and watch whether exactly the behaviour that bothers you changes. If it gets worse or less settled, put the value back.
- Fork: Rebound13 clicks2 clicks softer than stockcomputed
- Shock: Rebound18 clicks2 clicks softer than stockcomputed
- Transmission: Rear sprocket49 teeth1 tooth less than stockcomputed
- Shock: High-speed compression17.75 clicks0.25 clicks harder than stockcomputed
- Shock: Sag35 mmOEM
12 confirmed settings available.
Released reference setup, confirmed by an expert · Moderately documented
Referenced (not linked):- Beta RR (X-PRO) 4T MY2025 Owner's Manual / Use & Maintenance
Last reviewed: 30 Jul 2026
A starting point to verify on the bike - not a safety guarantee. Change one thing at a time and check on track. How LAISA derives this →
All recommended changes
In order, biggest deviation from the stock value first. Take them one at a time.
- Fork: Rebound2 clicks softer than stock
11 clicks13 clicksclicks out from fully closed
Reason: condition Enduro de Vertolaye
How to test it
Change Rebound only, nothing else. Then ride the same section or the same number of laps as before and watch whether exactly the behaviour that bothers you changes. If it gets worse or less settled, put the value back.
- Shock: Rebound2 clicks softer than stock
16 clicks18 clicksclicks out from fully closed
Reason: condition Enduro de Vertolaye
How to test it
Change Rebound only, nothing else. Then ride the same section or the same number of laps as before and watch whether exactly the behaviour that bothers you changes. If it gets worse or less settled, put the value back.
- Transmission: Rear sprocket1 tooth less than stock
50 teeth49 teeth
Reason: condition Enduro de Vertolaye
How to test it
Change Rear sprocket only, nothing else. Then ride the same section or the same number of laps as before and watch whether exactly the behaviour that bothers you changes. If it gets worse or less settled, put the value back.
- Shock: High-speed compression0.25 clicks harder than stock
18 clicks17.75 clicksclicks out from fully closed
Reason: condition Enduro de Vertolaye
How to test it
Change High-speed compression only, nothing else. Then ride the same section or the same number of laps as before and watch whether exactly the behaviour that bothers you changes. If it gets worse or less settled, put the value back.
All technical values
Complete settings, technical data, components, gearing and geometry - including the adjusters that exist on the bike but do not carry a confirmed value yet.
| ChainOEM Chain | ||
| ChassisOEM Chromoly Steel Frame | ||
| ClutchOEM Wet Multiplate Clutch | ||
| ForkSachs ZF 48 mm SHC Fork | ||
| Compressionclicks out from fully closed | 11 clicks | computed |
| Reboundclicks out from fully closed | 13 clicks▲ +2 | computed |
| Spring rate | 9.6 N/mm | OEM |
| HandlebarOEM Handlebar | ||
| ShockSachs ZF 46 mm Monoshock | ||
| Sagloaded, rider in gear | 35 mm | OEM |
| High-speed compressionclicks out from fully closed | 17.75 clicks▼ -0.25 | computed |
| Low-speed compressionclicks out from fully closed | 20 clicks | computed |
| Reboundclicks out from fully closed | 18 clicks▲ +2 | computed |
| Spring rate | 54 N/mm | OEM |
| TireMaxxis MaxxEnduro FIM | ||
| Front tire pressure | 1 bar (14.5 psi) | OEM |
| Rear tire pressure | 1 bar (14.5 psi) | OEM |
| TransmissionOEM Final Drive | ||
| Front sprocket | 13 teeth | OEM |
| Rear sprocket | 49 teeth▼ -1 | computed |
After the ride
Tested a change? Record what happened. LAISA stores it against this bike and this condition. The recommendation above does not adapt to it automatically yet.
About this baseline
For a 75 kg Intermediate rider with a Neutral style, the baseline for the Beta RR 350 4T 2025 at Enduro de Vertolaye shifts 4 of 12 computed settings away from the OEM standard. The biggest shifts: Rebound 13 clicks (+2 vs OEM), Rebound 18 clicks (+2 vs OEM). All values are computed from OEM defaults and your rider and condition factors.
Value provenance: OEM = manufacturer specification · verified = confirmed by an expert · reviewed = editorially reviewed reference · community = confirmed by the community (median of at least three public setups) · computed = automatically derived by the LAISA engine. Automatically extracted and unconfirmed values never appear on public pages.
Next steps
Dial in your riding technique
Skills that change how the bike behaves - often the real fix before any clicker.
Explore techniqueMatching protective gear
The right setup is half the job - the other half is protective gear matched to the discipline and conditions.
Gear for these conditionsUpgrades that fit
Optional aftermarket parts for this bike - the setup above comes first, these are next.
Affiliate links - we may earn a commission, at no extra cost to you.
Setups for this bike
1 setupsReference setups
Verified factory and expert setups.Related
Similar bikes
Matching tracks
Frequently asked questions
How much race sag for the Beta RR 350 4T 2025?
As a starting point, 35 mm of race sag at 75 kg rider weight. Measure with a helper and set it via spring preload.
What tire pressure is recommended for the Beta RR 350 4T 2025?
As a starting point: 1 bar front, 1 bar rear - computed for a 75 kg Intermediate rider. Check cold and adjust in small steps by feel.
What gearing (sprockets) does the Beta RR 350 4T 2025 run?
As a starting point, 13 teeth front / 49 teeth rear. For more acceleration go larger at the rear (or smaller at the front); for more top speed, the reverse.
Are these values safe to ride?
Baseline values are starting points generated from OEM defaults, rider weight, skill, style and conditions - not safety guarantees. Verify on the bike, adjust step by step and ride within your limits.
Baseline values are starting points generated from OEM defaults, rider weight, skill, style, and condition - or lifted from an expert/verified setup where one exists (see the provenance badge). They are not safety guarantees. Verify on the bike and ride within your limits.