LAISARR 350 4T 2025
Track: Systofte Cross Klub
← Back to Systofte Cross KlubTaken over from the track: Clay · dry
Beta RR 350 4T 2025 - 75 kg, Intermediate, Neutral, Systofte Cross Klub
Set this first
For this profile the bike stays on its stock values. There is nothing to change - check the values below against the bike.
Key values- Shock: Sag35 mmOEM
- Shock: Low-speed compression20 clicksOEM
- Shock: Rebound16 clicksOEM
- Fork: Compression11 clicksOEM
- Fork: Rebound11 clicksOEM
12 confirmed settings available.
Released reference setup, confirmed by an expert · Moderately documented
Referenced (not linked):- Beta RR (X-PRO) 4T MY2025 Owner's Manual / Use & Maintenance
Last reviewed: 29 Jul 2026
A starting point to verify on the bike - not a safety guarantee. Change one thing at a time and check on track. How LAISA derives this →
All technical values
Complete settings, technical data, components, gearing and geometry - including the adjusters that exist on the bike but do not carry a confirmed value yet.
| ChainOEM Chain | ||
| ChassisOEM Chromoly Steel Frame | ||
| ClutchOEM Wet Multiplate Clutch | ||
| ForkSachs ZF 48 mm SHC Fork | ||
| Compressionclicks out from fully closed | 11 clicks | OEM |
| Reboundclicks out from fully closed | 11 clicks | OEM |
| Spring rate | 9.6 N/mm | OEM |
| HandlebarOEM Handlebar | ||
| ShockSachs ZF 46 mm Monoshock | ||
| Sagloaded, rider in gear | 35 mm | OEM |
| High-speed compressionclicks out from fully closed | 18 clicks | OEM |
| Low-speed compressionclicks out from fully closed | 20 clicks | OEM |
| Reboundclicks out from fully closed | 16 clicks | OEM |
| Spring rate | 54 N/mm | OEM |
| TireMaxxis MaxxEnduro FIM | ||
| Front tire pressure | 1 bar (14.5 psi) | OEM |
| Rear tire pressure | 1 bar (14.5 psi) | OEM |
| TransmissionOEM Final Drive | ||
| Front sprocket | 13 teeth | OEM |
| Rear sprocket | 50 teeth | OEM |
After the ride
Tested a change? Record what happened. LAISA stores it against this bike and this condition. The recommendation above does not adapt to it automatically yet.
About this baseline
For a 75 kg Intermediate rider with a Neutral style, the baseline for the Beta RR 350 4T 2025 at Systofte Cross Klub shifts none of the 12 computed settings away from the OEM standard. All values are computed from OEM defaults and your rider and condition factors.
Value provenance: OEM = manufacturer specification · verified = confirmed by an expert · reviewed = editorially reviewed reference · community = confirmed by the community (median of at least three public setups) · computed = automatically derived by the LAISA engine. Automatically extracted and unconfirmed values never appear on public pages.
Next steps
Dial in your riding technique
Skills that change how the bike behaves - often the real fix before any clicker.
Explore techniqueMatching protective gear
The right setup is half the job - the other half is protective gear matched to the discipline and conditions.
Gear for these conditionsUpgrades that fit
Optional aftermarket parts for this bike - the setup above comes first, these are next.
Setups for this bike
1 setupsReference setups
Verified factory and expert setups.Related
Similar bikes
Matching tracks
Frequently asked questions
How much race sag for the Beta RR 350 4T 2025?
As a starting point, 35 mm of race sag at 75 kg rider weight. Measure with a helper and set it via spring preload.
What tire pressure is recommended for the Beta RR 350 4T 2025?
As a starting point: 1 bar front, 1 bar rear - computed for a 75 kg Intermediate rider. Check cold and adjust in small steps by feel.
What gearing (sprockets) does the Beta RR 350 4T 2025 run?
As a starting point, 13 teeth front / 50 teeth rear. For more acceleration go larger at the rear (or smaller at the front); for more top speed, the reverse.
Are these values safe to ride?
Baseline values are starting points generated from OEM defaults, rider weight, skill, style and conditions - not safety guarantees. Verify on the bike, adjust step by step and ride within your limits.
Baseline values are starting points generated from OEM defaults, rider weight, skill, style, and condition - or lifted from an expert/verified setup where one exists (see the provenance badge). They are not safety guarantees. Verify on the bike and ride within your limits.