TRIONLAISA
All bikes
KTM

300 EXC 2025

Track: Hell's Gate (Il Ciocco)

Back to Hell's Gate (Il Ciocco)Taken over from the track: Loam · Technical · Off-camber · Tight · dry

KTM 300 EXC 2025 - 75 kg, Intermediate, Neutral, Hell's Gate (Il Ciocco)

Set this first

Most important change

Fork: Compression

Stock value
15 clicks
Recommended
18 clicks
Change
3 clicks softer than stock

clicks out from fully closed

Reason: condition Hell's Gate (Il Ciocco)

How to test it: Change Compression only, nothing else. Then ride the same section or the same number of laps as before and watch whether exactly the behaviour that bothers you changes. If it gets worse or less settled, put the value back.

Key values

17 confirmed settings available.

Source

Released reference setup, confirmed by an expert

3 released references record no document.

Last reviewed: 30 Jul 2026

All recommended changes

In order, biggest deviation from the stock value first. Take them one at a time.

  1. Fork: Compression3 clicks softer than stock

    15 clicks18 clicksclicks out from fully closed

    Reason: condition Hell's Gate (Il Ciocco)

    How to test it

    Change Compression only, nothing else. Then ride the same section or the same number of laps as before and watch whether exactly the behaviour that bothers you changes. If it gets worse or less settled, put the value back.

  2. Shock: Low-speed compression3 clicks softer than stock

    15 clicks18 clicksclicks out from fully closed

    Reason: condition Hell's Gate (Il Ciocco)

    How to test it

    Change Low-speed compression only, nothing else. Then ride the same section or the same number of laps as before and watch whether exactly the behaviour that bothers you changes. If it gets worse or less settled, put the value back.

  3. Shock: Rebound1 click softer than stock

    15 clicks16 clicksclicks out from fully closed

    Reason: condition Hell's Gate (Il Ciocco)

    How to test it

    Change Rebound only, nothing else. Then ride the same section or the same number of laps as before and watch whether exactly the behaviour that bothers you changes. If it gets worse or less settled, put the value back.

  4. Fork: Rebound1 click softer than stock

    17 clicks18 clicksclicks out from fully closed

    Reason: condition Hell's Gate (Il Ciocco)

    How to test it

    Change Rebound only, nothing else. Then ride the same section or the same number of laps as before and watch whether exactly the behaviour that bothers you changes. If it gets worse or less settled, put the value back.

  5. Transmission: Rear sprocket1 tooth more than stock

    45 teeth46 teeth

    Reason: condition Hell's Gate (Il Ciocco)

    How to test it

    Change Rear sprocket only, nothing else. Then ride the same section or the same number of laps as before and watch whether exactly the behaviour that bothers you changes. If it gets worse or less settled, put the value back.

All technical values

Complete settings, technical data, components, gearing and geometry - including the adjusters that exist on the bike but do not carry a confirmed value yet.

17 confirmed values
BrakeBraktec Hydraulic Disc Brakes
ChainOEM Chain
Chain length118 linksOEM
ChassisOEM Chromoly Steel Frame
ClutchOEM DDS Wet Multiplate Clutch
ECUKeihin EMS
ForkWP XACT 48 mm Closed-Cartridge Spring Fork
Compressionclicks out from fully closed18 clicks +3computed
Reboundclicks out from fully closed18 clicks +1computed
Static sagwithout load15 mmOEM
Spring rate4.4 N/mmOEM
HandlebarOEM Handlebar
ShockWP XPLOR PDS Shock
Sagloaded, rider in gear110 mmOEM
Static sagwithout load38 mmOEM
High-speed compressionclicks out from fully closed2 turnsOEM
Low-speed compressionclicks out from fully closed18 clicks +3computed
Preload7 mmOEM
Reboundclicks out from fully closed16 clicks +1computed
Spring rate69 N/mmOEM
SwingarmOEM Aluminium Swingarm
TireMaxxis MaxxEnduro
Front tire pressure1 bar (14.5 psi)OEM
Rear tire pressure1 bar (14.5 psi)OEM
TransmissionOEM Final Drive
Front sprocket14 teethOEM
Rear sprocket46 teeth +1computed
Triple ClampOEM CNC Triple Clamp
Offset22 mmOEM

After the ride

Tested a change? Record what happened. LAISA stores it against this bike and this condition. The recommendation above does not adapt to it automatically yet.

About this baseline

For a 75 kg Intermediate rider with a Neutral style, the baseline for the KTM 300 EXC 2025 at Hell's Gate (Il Ciocco) shifts 5 of 17 computed settings away from the OEM standard. The biggest shifts: Compression 18 clicks (+3 vs OEM), Low-speed compression 18 clicks (+3 vs OEM). All values are computed from OEM defaults and your rider and condition factors.

Value provenance: OEM = manufacturer specification · verified = confirmed by an expert · reviewed = editorially reviewed reference · community = confirmed by the community (median of at least three public setups) · computed = automatically derived by the LAISA engine. Automatically extracted and unconfirmed values never appear on public pages.

Next steps

Dial in your riding technique

Skills that change how the bike behaves - often the real fix before any clicker.

Explore technique

Matching protective gear

The right setup is half the job - the other half is protective gear matched to the discipline and conditions.

Gear for these conditions

Upgrades that fit

Optional aftermarket parts for this bike - the setup above comes first, these are next.

Exhaustfits
Pro Circuit Pro Circuit Auspuffbirne Platinum
Clutchfits
Acerbis Acerbis Kupplungs/Zündungsdeckelschutz X-Power
Tirelikely fit
Bridgestone Bridgestone G515 ( 110/80-19 TT 59S M/C, Vorderrad )
Forklikely fit
SPV2 Factory Fork Upgrade
See more parts that fit
Set it up like a pro

Get it professionally dialed in - find a coach or a track day.

Find coaching

Setups for this bike

3 setups

Reference setups

Verified factory and expert setups.
ReferenceWP Comfort (factory map)AI
Cross-CountryHard Enduro
Compressionclicks out from fully closed18 clicks
Reboundclicks out from fully closed18 clicks
Sagloaded, rider in gear110 mm
High-speed compressionclicks out from fully closed2.5 clicks
Low-speed compressionclicks out from fully closed18 clicks
Reboundclicks out from fully closed18 clicks
ReferenceWP Standard (factory map)AI
Cross-CountryHard Enduro
Compressionclicks out from fully closed15 clicks
Reboundclicks out from fully closed15 clicks
Sagloaded, rider in gear110 mm
Static sagwithout load37 mm
High-speed compressionclicks out from fully closed2 clicks
Low-speed compressionclicks out from fully closed15 clicks
Reboundclicks out from fully closed15 clicks
Spring rate63 N/mm
ReferenceWP Sport (factory map)AI
Cross-CountryHard Enduro
Compressionclicks out from fully closed12 clicks
Reboundclicks out from fully closed12 clicks
Sagloaded, rider in gear110 mm
High-speed compressionclicks out from fully closed1 clicks
Low-speed compressionclicks out from fully closed12 clicks
Reboundclicks out from fully closed12 clicks

Related

Similar bikes

Sherco 300 SEF Factory 2024KTM 350 EXC-F 2025KTM 500 EXC-F 2025Ducati Desmo450 EDX 2026GasGas EC 300 2024Husqvarna FE 350 2025Beta RR 300 2024Beta RR 350 4T 2025

Matching tracks

24MX Alestrem Hard Enduro (Alès) (Gard)ADAC OWL Enduro/MX Trainingsgelände (Nordrhein-Westfalen)AREA 39, Armin Schwarz driving center- Gröningen (Sachsen-Anhalt)Aulumbanen (Midtjylland)BMW Motorrad Enduro Park Hechlingen (Bayern)Borilli Off Road Park (Trentino-Alto Adige)BÄR Enduro (Lägern) (Zürich)Classic Enduro Zschopau (MSC MZ) (Sachsen)

Comparisons

vs Sherco 300 SEF Factory 2024vs KTM 350 EXC-F 2025vs KTM 500 EXC-F 2025vs Ducati Desmo450 EDX 2026vs GasGas EC 300 2024vs Husqvarna FE 350 2025

Frequently asked questions

How much race sag for the KTM 300 EXC 2025?

As a starting point, 110 mm of race sag at 75 kg rider weight. Measure with a helper and set it via spring preload.

What tire pressure is recommended for the KTM 300 EXC 2025?

As a starting point: 1 bar front, 1 bar rear - computed for a 75 kg Intermediate rider. Check cold and adjust in small steps by feel.

What gearing (sprockets) does the KTM 300 EXC 2025 run?

As a starting point, 14 teeth front / 46 teeth rear. For more acceleration go larger at the rear (or smaller at the front); for more top speed, the reverse.

Are these values safe to ride?

Baseline values are starting points generated from OEM defaults, rider weight, skill, style and conditions - not safety guarantees. Verify on the bike, adjust step by step and ride within your limits.

Baseline values are starting points generated from OEM defaults, rider weight, skill, style, and condition - or lifted from an expert/verified setup where one exists (see the provenance badge). They are not safety guarantees. Verify on the bike and ride within your limits.

Ratings & reviews

No reviews yet - be the first.
Write a review