High Voltage Motocross Park
Data origin10 entries from an importSource: High Voltage MX Park - RiderPlanet USACheck date not documented
Location
Track details
Dry loam is the ideal case: grippy, forms lines and forgives mistakes.
After rain loam turns heavy and sticky - knobs pack up and the bike feels noticeably heavier.
Two tracks, about 100 acres, both watered and groomed: High Voltage near Ford City in Armstrong County keeps it simple. A dedicated peewee track sits next to the main course, and the site itself lies between roughly 900 and 1000 feet. The listed rider fee is 20 dollars, 15 on the peewee track, plus a 10 dollar annual membership. Quads, side-by-sides and unregistered 4x4s are listed as not permitted, and there is no camping on the grounds. Check before you travel whether riding is happening. Two courses side by side are the best chance to bring the kids without someone standing at the fence all day. Plan the session accordingly: the short track with the child first, your own riding afterwards - the other way round you will be too tired to stay patient. The problem waiting for you in tight technical sections: the engine stalls. First on our cause list is a dragging clutch or a flywheel that is too light - a flywheel weight or a clean clutch setup stops the low-rpm stalling.
Track condition today
Loam at 15 °C, no rain right now - good conditions to ride.
Low confidence · Based on: Weather model
Next windowtoday 10:00–20:00
Reports from the track
Anyone riding there today can report how the ground is running in 30 seconds. Those reports decide the assessment above - without them it stays a weather forecast.
No report has been filed for this track yet, so the assessment above rests on the weather model alone.
Track profile
Difficulty: Demanding
- Technical5/5
- Jumps5/5
- Fitness5/5
Not rated: Speed, Grip changes
Automatically derived from the recorded track characteristics - not assessed by LAISA on site.
What to expect
- Biggest challenge
- Bike kicks / bucks off jump faces Go to diagnosis →
- Typical setup problem
- Rebound returns too fast and launches the rear off the face - slow it (fewer clicks out).
- Riding-technique focus
- Controlling the bike off jump faces Go to the technique guide →
Automatically derived: this track's attributes combined with LAISA's troubleshooting knowledge.
Organisation and rules
LAISA has nothing confirmed about opening hours, fees or rules for this track. Please check with the operator before travelling.
Short answer for this track
- Recommended starting point
- Loam - Motocross - start from the setup computed for your bike. Compute a setup →
- Most important change
- For this track the LAISA engine mainly moves: Fork: Rebound, Fork: Compression, Shock: Compression. The actual values depend on your bike and your rider profile.
- Why
- Surface Loam, track character: Jumps, Technical.
- How to test it
- Ride two laps on the starting value, then change one setting only and ride the same two laps again.
- Source
- 1 cited source · 10 entries from an import
Rides similarly
Similar because of Loam, Jumps, and Technical
Similar because of Loam, Jumps, and Technical
Similar because of Loam, Jumps, and Technical
Nearby
54 km away, also Loam
144 km away, also Loam
Interested? This could suit you and High Voltage Motocross Park
AdRelevant gear, picked for this track's discipline.
Affiliate links - we may earn a commission at no extra cost to you. The recommendation is safety-first and never influenced by offers.


