LAISAYZ250 2006 - Hardpack
Tuned for Esanatoglia - Gina Libani Repetti - adds: hardpack, technical, off_camber
Yamaha YZ250 2006 - 75 kg, Intermediate, Neutral, Hardpack - Esanatoglia - Gina Libani Repetti
Set this first
Shock: High-speed compression
- Stock value
- 1.5 turns
- Recommended
- 1 turn
- Change
- 0.5 turns harder than stock
clicks out from fully closed
How to test it: Change High-speed compression only, nothing else. Then ride the same section or the same number of laps as before and watch whether exactly the behaviour that bothers you changes. If it gets worse or less settled, put the value back.
- Shock: High-speed compression1 turn0.5 turns harder than stockcomputed
- Shock: Low-speed compression16 clicks3 clicks softer than stockcomputed
- Fork: Compression17 clicks3 clicks softer than stockcomputed
- Shock: Rebound12 clicks2 clicks softer than stockcomputed
- Fork: Rebound16 clicks2 clicks softer than stockcomputed
13 confirmed settings available.
Computed from factory specs and your factors
Last reviewed: no release date - this starting value was computed, not measured.
A starting point to verify on the bike - not a safety guarantee. Change one thing at a time and check on track. How LAISA derives this →
All recommended changes
In order, biggest deviation from the stock value first. Take them one at a time.
- Shock: High-speed compression0.5 turns harder than stock
1.5 turns1 turnclicks out from fully closed
How to test it
Change High-speed compression only, nothing else. Then ride the same section or the same number of laps as before and watch whether exactly the behaviour that bothers you changes. If it gets worse or less settled, put the value back.
- Shock: Low-speed compression3 clicks softer than stock
13 clicks16 clicksclicks out from fully closed
Reason: condition Hardpack - Esanatoglia - Gina Libani Repetti
How to test it
Change Low-speed compression only, nothing else. Then ride the same section or the same number of laps as before and watch whether exactly the behaviour that bothers you changes. If it gets worse or less settled, put the value back.
- Fork: Compression3 clicks softer than stock
14 clicks17 clicksclicks out from fully closed
Reason: condition Hardpack - Esanatoglia - Gina Libani Repetti
How to test it
Change Compression only, nothing else. Then ride the same section or the same number of laps as before and watch whether exactly the behaviour that bothers you changes. If it gets worse or less settled, put the value back.
- Shock: Rebound2 clicks softer than stock
10 clicks12 clicksclicks out from fully closed
Reason: condition Hardpack - Esanatoglia - Gina Libani Repetti
How to test it
Change Rebound only, nothing else. Then ride the same section or the same number of laps as before and watch whether exactly the behaviour that bothers you changes. If it gets worse or less settled, put the value back.
- Fork: Rebound2 clicks softer than stock
14 clicks16 clicksclicks out from fully closed
Reason: condition Hardpack - Esanatoglia - Gina Libani Repetti
How to test it
Change Rebound only, nothing else. Then ride the same section or the same number of laps as before and watch whether exactly the behaviour that bothers you changes. If it gets worse or less settled, put the value back.
- Tire: Rear tire pressure0.1 bar more than stock
1 bar1.1 bar
Reason: condition Hardpack - Esanatoglia - Gina Libani Repetti
How to test it
Change Rear tire pressure only, nothing else. Then ride the same section or the same number of laps as before and watch whether exactly the behaviour that bothers you changes. If it gets worse or less settled, put the value back.
- Tire: Front tire pressure0.05 bar more than stock
1 bar1.05 bar
Reason: condition Hardpack - Esanatoglia - Gina Libani Repetti
How to test it
Change Front tire pressure only, nothing else. Then ride the same section or the same number of laps as before and watch whether exactly the behaviour that bothers you changes. If it gets worse or less settled, put the value back.
- Fork: Spring rate0.02 N/mm less than stock
4.22 N/mm4.2 N/mm
How to test it
Change Spring rate only, nothing else. Then ride the same section or the same number of laps as before and watch whether exactly the behaviour that bothers you changes. If it gets worse or less settled, put the value back.
All technical values
Complete settings, technical data, components, gearing and geometry - including the adjusters that exist on the bike but do not carry a confirmed value yet.
| BrakeNissin Hydraulic Disc Brakes | ||
| ChainOEM Chain | ||
| Chain length | 114 links | OEM |
| ChassisOEM Aluminium Bilateral Beam Frame (Yamaha MX 2006-2011) | ||
| ClutchOEM Wet Multiplate Clutch | ||
| ForkKYB SSS 48 mm Coil Fork | ||
| Compressionclicks out from fully closed | 17 clicks▲ +3 | computed |
| Reboundclicks out from fully closed | 16 clicks▲ +2 | computed |
| Spring rate | 4.2 N/mm | OEM |
| HandlebarOEM Handlebar | ||
| ShockKYB Piggyback Monoshock | ||
| Sagloaded, rider in gear | 95 mm | OEM |
| High-speed compressionclicks out from fully closed | 1 turn▼ -0.5 | computed |
| Low-speed compressionclicks out from fully closed | 16 clicks▲ +3 | computed |
| Reboundclicks out from fully closed | 12 clicks▲ +2 | computed |
| Spring rate | 48 N/mm | OEM |
| SwingarmOEM Aluminium Swingarm | ||
| TireDunlop Geomax D742/D756 | ||
| Front tire pressure | 1.05 bar (15.23 psi)▲ +0.05 | computed |
| Rear tire pressure | 1.1 bar (15.95 psi)▲ +0.1 | computed |
| TransmissionOEM Final Drive | ||
| Front sprocket | 14 teeth | OEM |
| Rear sprocket | 50 teeth | OEM |
After the ride
Tested a change? Record what happened. LAISA stores it against this bike and this condition. The recommendation above does not adapt to it automatically yet.
About this baseline
For a 75 kg Intermediate rider with a Neutral style, the Hardpack baseline for the Yamaha YZ250 2006 at Esanatoglia - Gina Libani Repetti shifts 8 of 13 computed settings away from the OEM standard. The biggest shifts: High-speed compression 1 turn (-0,5 vs OEM), Low-speed compression 16 clicks (+3 vs OEM). All values are computed from OEM defaults and your rider and condition factors.
Value provenance: OEM = manufacturer specification · verified = confirmed by an expert · reviewed = editorially reviewed reference · community = confirmed by the community (median of at least three public setups) · computed = automatically derived by the LAISA engine. Automatically extracted and unconfirmed values never appear on public pages.
No public community setups yet for this bike and condition.
Doesn't feel right on track?
Pick the symptom and we'll show the likely setup causes - and whether it is really a technique thing.
Troubleshoot a handling problemMatching protective gear
The right setup is half the job - the other half is protective gear matched to the discipline and conditions.
Affiliate links - we may earn a commission at no extra cost to you. The recommendation is safety-first and never influenced by offers.
Frequently asked questions
What is a good Hardpack setup for the Yamaha YZ250 2006?
For a 75 kg Intermediate rider with a Neutral style, the Hardpack baseline for the Yamaha YZ250 2006 at Esanatoglia - Gina Libani Repetti shifts 8 of 13 computed settings away from the OEM standard. The biggest shifts: High-speed compression 1 turn (-0,5 vs OEM), Low-speed compression 16 clicks (+3 vs OEM).
How much race sag for the Yamaha YZ250 2006?
As a starting point, 95 mm of race sag at 75 kg rider weight. Measure with a helper and set it via spring preload.
What tire pressure for the Yamaha YZ250 2006 in Hardpack conditions?
As a starting point: 1.05 bar front, 1.1 bar rear - computed for a 75 kg Intermediate rider. Check cold and adjust in small steps by feel.
What gearing (sprockets) does the Yamaha YZ250 2006 run?
As a starting point, 14 teeth front / 50 teeth rear. For more acceleration go larger at the rear (or smaller at the front); for more top speed, the reverse.
Are these values safe to ride?
Baseline values are starting points generated from OEM defaults, rider weight, skill, style and conditions - not safety guarantees. Verify on the bike, adjust step by step and ride within your limits.
Baseline values are starting points generated from OEM defaults, rider weight, skill, style, and condition - or lifted from an expert/verified setup where one exists (see the provenance badge). They are not safety guarantees. Verify on the bike and ride within your limits.