LAISA300 SEF Factory 2024 - Hard Enduro
Tuned for SHC Meltewitz Offroad Team e.V. - adds: mixed
Sherco 300 SEF Factory 2024 - 75 kg, Intermediate, Neutral, Hard Enduro - SHC Meltewitz Offroad Team e.V.
Set this first
There is nothing to change here: the values below come from a released reference and are used as they are - so there is no factory value for them to deviate from.
Key values- Shock: Sag95 mmno stock value on record to compare againstverified
- Shock: Low-speed compression14 clicksno stock value on record to compare againstverified
- Shock: Rebound13 clicksno stock value on record to compare againstverified
- Fork: Compression12 clicksno stock value on record to compare againstverified
- Fork: Rebound12 clicksno stock value on record to compare againstverified
14 confirmed settings available.
Released reference setup, confirmed by an expert · Moderately documented
Referenced (not linked):- Primary: Official Sherco 250-300 SEF Racing/Factory 2024 owner's manual (sherco.com/wp-content/uploads/OWNER_MANUAL_250-300_SEF-2024.pdf). 4-stroke SEF (303.7 cc). FACTORY suspension = KAYABA (KYB) USD 48 mm CLOSED-CARTRIDGE fork + KYB separate-reservoir shock (distinct from the SEF Racing open-cartridge fork). "Standard" column = as-delivered (2024)
- spring marked "(Origine)" = as-fitted. Fork (Factory) compression Std 12 clics / rebound Std 12 clics
- shock low-speed comp Std 14 clics / high-speed comp Std 1.5 tours / rebound Std 13 clics
- fork spring 4.2 N/mm (Origine)
- shock spring 48 N/mm (Origine). Loaded rider sag 95-100 mm
- static sag 35-40 mm (stored as ranges via valueMax). Off-road tyre pressure 0.9/0.9 bar. Secondary transmission 300 SEF = 13x48. tire_compound medium (OE enduro tyre). source=ai, unverified DRAFT.
Last reviewed: 29 Jul 2026
A starting point to verify on the bike - not a safety guarantee. Change one thing at a time and check on track. How LAISA derives this →
All technical values
Complete settings, technical data, components, gearing and geometry - including the adjusters that exist on the bike but do not carry a confirmed value yet.
| BrakeBrembo Hydraulic Disc Brakes (260/220 mm) | ||
| ChainOEM Chain | ||
| ChassisOEM Chromoly Steel Frame | ||
| ClutchOEM Wet Multiplate Clutch | ||
| ECUOEM Engine Management | ||
| ForkKYB 48 mm Closed-Cartridge Enduro Fork | ||
| Compressionclicks out from fully closed | 12 clicks | verified |
| Reboundclicks out from fully closed | 12 clicks | verified |
| Spring rate | 4.2 N/mm | verified |
| HandlebarOEM Handlebar | ||
| ShockKYB Link-Type Enduro Monoshock | ||
| Sagloaded, rider in gear | 95 mm - 100 | verified |
| Static sagwithout load | 35 mm - 40 | verified |
| High-speed compressionclicks out from fully closed | 1.5 turns | verified |
| Low-speed compressionclicks out from fully closed | 14 clicks | verified |
| Reboundclicks out from fully closed | 13 clicks | verified |
| Spring rate | 48 N/mm | verified |
| SwingarmOEM Aluminium Swingarm | ||
| TireMichelin Enduro Medium | ||
| Compound | medium | verified |
| Front tire pressure | 0.9 bar (13.05 psi) | verified |
| Rear tire pressure | 0.9 bar (13.05 psi) | verified |
| TransmissionOEM Final Drive | ||
| Front sprocket | 13 teeth | verified |
| Rear sprocket | 48 teeth | verified |
| Triple ClampOEM CNC Triple Clamp | ||
After the ride
Tested a change? Record what happened. LAISA stores it against this bike and this condition. The recommendation above does not adapt to it automatically yet.
About this baseline
For a 75 kg Intermediate rider with a Neutral style, the Hard Enduro baseline for the Sherco 300 SEF Factory 2024 at SHC Meltewitz Offroad Team e.V. shifts none of the 14 computed settings away from the OEM standard. Values come from OEM defaults, your rider and condition factors and 14 verified reference setups.
Value provenance: OEM = manufacturer specification · verified = confirmed by an expert · reviewed = editorially reviewed reference · community = confirmed by the community (median of at least three public setups) · computed = automatically derived by the LAISA engine. Automatically extracted and unconfirmed values never appear on public pages.
No public community setups yet for this bike and condition.
Doesn't feel right on track?
Pick the symptom and we'll show the likely setup causes - and whether it is really a technique thing.
Troubleshoot a handling problemMatching protective gear
The right setup is half the job - the other half is protective gear matched to the discipline and conditions.
Affiliate links - we may earn a commission at no extra cost to you. The recommendation is safety-first and never influenced by offers.
Frequently asked questions
What is a good Hard Enduro setup for the Sherco 300 SEF Factory 2024?
For a 75 kg Intermediate rider with a Neutral style, the Hard Enduro baseline for the Sherco 300 SEF Factory 2024 at SHC Meltewitz Offroad Team e.V. shifts none of the 14 computed settings away from the OEM standard.
How much race sag for the Sherco 300 SEF Factory 2024?
As a starting point, 95 mm of race sag at 75 kg rider weight. Measure with a helper and set it via spring preload.
What tire pressure for the Sherco 300 SEF Factory 2024 in Hard Enduro conditions?
As a starting point: 0.9 bar front, 0.9 bar rear - computed for a 75 kg Intermediate rider. Check cold and adjust in small steps by feel.
What gearing (sprockets) does the Sherco 300 SEF Factory 2024 run?
As a starting point, 13 teeth front / 48 teeth rear. For more acceleration go larger at the rear (or smaller at the front); for more top speed, the reverse.
Are these values safe to ride?
Baseline values are starting points generated from OEM defaults, rider weight, skill, style and conditions - not safety guarantees. Verify on the bike, adjust step by step and ride within your limits.
Baseline values are starting points generated from OEM defaults, rider weight, skill, style, and condition - or lifted from an expert/verified setup where one exists (see the provenance badge). They are not safety guarantees. Verify on the bike and ride within your limits.