LAISA250 SX-F 2013 - Sand
Tuned for MCC Tessin Motocross - adds: sand, jumps, fast
KTM 250 SX-F 2013 - 75 kg, Intermediate, Neutral, Sand - MCC Tessin Motocross
Set this first
Fork: Compression
- Stock value
- 12 clicks
- Recommended
- 8 clicks
- Change
- 4 clicks harder than stock
clicks out from fully closed
Reason: condition Sand - MCC Tessin Motocross
How to test it: Change Compression only, nothing else. Then ride the same section or the same number of laps as before and watch whether exactly the behaviour that bothers you changes. If it gets worse or less settled, put the value back.
- Fork: Compression8 clicks4 clicks harder than stockcomputed
- Shock: High-speed compression1 turn0.5 turns harder than stockcomputed
- Shock: Low-speed compression11 clicks4 clicks harder than stockcomputed
- Tire: Front tire pressure0.9 bar0.1 bar less than stockcomputed
- Tire: Rear tire pressure0.9 bar0.1 bar less than stockcomputed
15 confirmed settings available.
Computed from factory specs and your factors
Last reviewed: no release date - this starting value was computed, not measured.
A starting point to verify on the bike - not a safety guarantee. Change one thing at a time and check on track. How LAISA derives this →
All recommended changes
In order, biggest deviation from the stock value first. Take them one at a time.
- Fork: Compression4 clicks harder than stock
12 clicks8 clicksclicks out from fully closed
Reason: condition Sand - MCC Tessin Motocross
How to test it
Change Compression only, nothing else. Then ride the same section or the same number of laps as before and watch whether exactly the behaviour that bothers you changes. If it gets worse or less settled, put the value back.
- Shock: High-speed compression0.5 turns harder than stock
1.5 turns1 turnclicks out from fully closed
How to test it
Change High-speed compression only, nothing else. Then ride the same section or the same number of laps as before and watch whether exactly the behaviour that bothers you changes. If it gets worse or less settled, put the value back.
- Shock: Low-speed compression4 clicks harder than stock
15 clicks11 clicksclicks out from fully closed
Reason: condition Sand - MCC Tessin Motocross
How to test it
Change Low-speed compression only, nothing else. Then ride the same section or the same number of laps as before and watch whether exactly the behaviour that bothers you changes. If it gets worse or less settled, put the value back.
- Tire: Front tire pressure0.1 bar less than stock
1 bar0.9 bar
Reason: condition Sand - MCC Tessin Motocross
How to test it
Change Front tire pressure only, nothing else. Then ride the same section or the same number of laps as before and watch whether exactly the behaviour that bothers you changes. If it gets worse or less settled, put the value back.
- Tire: Rear tire pressure0.1 bar less than stock
1 bar0.9 bar
Reason: condition Sand - MCC Tessin Motocross
How to test it
Change Rear tire pressure only, nothing else. Then ride the same section or the same number of laps as before and watch whether exactly the behaviour that bothers you changes. If it gets worse or less settled, put the value back.
- Fork: Rebound1 click softer than stock
20 clicks21 clicksclicks out from fully closed
Reason: condition Sand - MCC Tessin Motocross
How to test it
Change Rebound only, nothing else. Then ride the same section or the same number of laps as before and watch whether exactly the behaviour that bothers you changes. If it gets worse or less settled, put the value back.
- Shock: Sag5 mm more than stock
105 mm110 mmloaded, rider in gear
Reason: condition Sand - MCC Tessin Motocross
How to test it
Change Sag only, nothing else. Then ride the same section or the same number of laps as before and watch whether exactly the behaviour that bothers you changes. If it gets worse or less settled, put the value back.
- Shock: Rebound1 click softer than stock
22 clicks23 clicksclicks out from fully closed
Reason: condition Sand - MCC Tessin Motocross
How to test it
Change Rebound only, nothing else. Then ride the same section or the same number of laps as before and watch whether exactly the behaviour that bothers you changes. If it gets worse or less settled, put the value back.
- Fork: Spring rate0.1 N/mm more than stock
4.4 N/mm4.5 N/mm
Reason: condition Sand - MCC Tessin Motocross
How to test it
Change Spring rate only, nothing else. Then ride the same section or the same number of laps as before and watch whether exactly the behaviour that bothers you changes. If it gets worse or less settled, put the value back.
- Transmission: Rear sprocket1 tooth less than stock
48 teeth47 teeth
Reason: condition Sand - MCC Tessin Motocross
How to test it
Change Rear sprocket only, nothing else. Then ride the same section or the same number of laps as before and watch whether exactly the behaviour that bothers you changes. If it gets worse or less settled, put the value back.
- Shock: Spring rate1 N/mm more than stock
69 N/mm70 N/mm
Reason: condition Sand - MCC Tessin Motocross
How to test it
Change Spring rate only, nothing else. Then ride the same section or the same number of laps as before and watch whether exactly the behaviour that bothers you changes. If it gets worse or less settled, put the value back.
All technical values
Complete settings, technical data, components, gearing and geometry - including the adjusters that exist on the bike but do not carry a confirmed value yet.
| BrakeBrembo Hydraulic Disc Brakes (260/220 mm) | ||
| ChainOEM Chain | ||
| Chain length | 114 links | OEM |
| ChassisOEM Chromoly Steel Frame | ||
| ClutchOEM Wet Multiplate Clutch | ||
| ECUKeihin EMS | ||
| ForkWP 4860 MXMA Closed-Cartridge Fork | ||
| Compressionclicks out from fully closed | 8 clicks▼ -4 | computed |
| Reboundclicks out from fully closed | 21 clicks▲ +1 | computed |
| Spring rate | 4.5 N/mm▲ +0.1 | computed |
| HandlebarOEM Handlebar | ||
| ShockWP XACT Monoshock | ||
| Sagloaded, rider in gear | 110 mm▲ +5 | computed |
| Static sagwithout load | 33 mm | OEM |
| High-speed compressionclicks out from fully closed | 1 turn▼ -0.5 | computed |
| Low-speed compressionclicks out from fully closed | 11 clicks▼ -4 | computed |
| Reboundclicks out from fully closed | 23 clicks▲ +1 | computed |
| Spring rate | 70 N/mm▲ +1 | computed |
| SwingarmOEM Aluminium Swingarm | ||
| TireBridgestone Motocross M59/M70 | ||
| Front tire pressure | 0.9 bar (13.05 psi)▼ -0.1 | computed |
| Rear tire pressure | 0.9 bar (13.05 psi)▼ -0.1 | computed |
| TransmissionOEM Final Drive | ||
| Front sprocket | 13 teeth | OEM |
| Rear sprocket | 47 teeth▼ -1 | computed |
| Triple ClampOEM CNC Triple Clamp | ||
| Offset | 22 mm | OEM |
After the ride
Tested a change? Record what happened. LAISA stores it against this bike and this condition. The recommendation above does not adapt to it automatically yet.
About this baseline
For a 75 kg Intermediate rider with a Neutral style, the Sand baseline for the KTM 250 SX-F 2013 at MCC Tessin Motocross shifts 11 of 15 computed settings away from the OEM standard. The biggest shifts: Compression 8 clicks (-4 vs OEM), High-speed compression 1 turn (-0,5 vs OEM). All values are computed from OEM defaults and your rider and condition factors.
Value provenance: OEM = manufacturer specification · verified = confirmed by an expert · reviewed = editorially reviewed reference · community = confirmed by the community (median of at least three public setups) · computed = automatically derived by the LAISA engine. Automatically extracted and unconfirmed values never appear on public pages.
No public community setups yet for this bike and condition.
Doesn't feel right on track?
Pick the symptom and we'll show the likely setup causes - and whether it is really a technique thing.
Troubleshoot a handling problemMatching protective gear
The right setup is half the job - the other half is protective gear matched to the discipline and conditions.
Affiliate links - we may earn a commission at no extra cost to you. The recommendation is safety-first and never influenced by offers.
Frequently asked questions
What is a good Sand setup for the KTM 250 SX-F 2013?
For a 75 kg Intermediate rider with a Neutral style, the Sand baseline for the KTM 250 SX-F 2013 at MCC Tessin Motocross shifts 11 of 15 computed settings away from the OEM standard. The biggest shifts: Compression 8 clicks (-4 vs OEM), High-speed compression 1 turn (-0,5 vs OEM).
How much race sag for the KTM 250 SX-F 2013?
As a starting point, 110 mm of race sag at 75 kg rider weight. Measure with a helper and set it via spring preload.
What tire pressure for the KTM 250 SX-F 2013 in Sand conditions?
As a starting point: 0.9 bar front, 0.9 bar rear - computed for a 75 kg Intermediate rider. Check cold and adjust in small steps by feel.
What gearing (sprockets) does the KTM 250 SX-F 2013 run?
As a starting point, 13 teeth front / 47 teeth rear. For more acceleration go larger at the rear (or smaller at the front); for more top speed, the reverse.
Are these values safe to ride?
Baseline values are starting points generated from OEM defaults, rider weight, skill, style and conditions - not safety guarantees. Verify on the bike, adjust step by step and ride within your limits.
Baseline values are starting points generated from OEM defaults, rider weight, skill, style, and condition - or lifted from an expert/verified setup where one exists (see the provenance badge). They are not safety guarantees. Verify on the bike and ride within your limits.