LAISAMX250 2025 - Hardpack
Tuned for Caraglio - adds: hardpack, technical, tight
Kove MX250 2025 - 75 kg, Intermediate, Neutral, Hardpack - Caraglio
Set this first
Transmission: Rear sprocket
- Stock value
- 50 teeth
- Recommended
- 51 teeth
- Change
- 1 tooth more than stock
Reason: condition Hardpack - Caraglio
How to test it: Change Rear sprocket only, nothing else. Then ride the same section or the same number of laps as before and watch whether exactly the behaviour that bothers you changes. If it gets worse or less settled, put the value back.
- Transmission: Rear sprocket51 teeth1 tooth more than stockcomputed
- Transmission: Front sprocket13 teethOEM
6 confirmed settings available.
Computed from factory specs and your factors
Last reviewed: no release date - this starting value was computed, not measured.
A starting point to verify on the bike - not a safety guarantee. Change one thing at a time and check on track. How LAISA derives this →
All recommended changes
In order, biggest deviation from the stock value first. Take them one at a time.
- Transmission: Rear sprocket1 tooth more than stock
50 teeth51 teeth
Reason: condition Hardpack - Caraglio
How to test it
Change Rear sprocket only, nothing else. Then ride the same section or the same number of laps as before and watch whether exactly the behaviour that bothers you changes. If it gets worse or less settled, put the value back.
All technical values
Complete settings, technical data, components, gearing and geometry - including the adjusters that exist on the bike but do not carry a confirmed value yet.
| BrakeNissin Hydraulic Disc Brakes | ||
| ChainOEM Chain | ||
| Chain length | 114 links | OEM |
| ChassisOEM Aluminium Twin Spar Frame | ||
| Fork height in clampstube protrusion above top clamp | 0 ring | OEM |
| ClutchOEM Wet Multiplate Clutch | ||
| ECUBOSCH Engine Management | ||
| ForkKYB Dual Chamber 48 mm Fork | ||
| Spring rate | 4.8 N/mm | OEM |
| HandlebarOEM Handlebar | ||
| ShockKYB Piggyback Monoshock | ||
| Spring rate | 50 N/mm | OEM |
| SwingarmOEM Aluminium Swingarm | ||
| TransmissionOEM Final Drive | ||
| Front sprocket | 13 teeth | OEM |
| Rear sprocket | 51 teeth▲ +1 | computed |
After the ride
Tested a change? Record what happened. LAISA stores it against this bike and this condition. The recommendation above does not adapt to it automatically yet.
About this baseline
For a 75 kg Intermediate rider with a Neutral style, the Hardpack baseline for the Kove MX250 2025 at Caraglio shifts one of 6 computed settings away from the OEM standard. The biggest shifts: Rear sprocket 51 teeth (+1 vs OEM). All values are computed from OEM defaults and your rider and condition factors.
Value provenance: OEM = manufacturer specification · verified = confirmed by an expert · reviewed = editorially reviewed reference · community = confirmed by the community (median of at least three public setups) · computed = automatically derived by the LAISA engine. Automatically extracted and unconfirmed values never appear on public pages.
No public community setups yet for this bike and condition.
Doesn't feel right on track?
Pick the symptom and we'll show the likely setup causes - and whether it is really a technique thing.
Troubleshoot a handling problemMatching protective gear
The right setup is half the job - the other half is protective gear matched to the discipline and conditions.
Affiliate links - we may earn a commission at no extra cost to you. The recommendation is safety-first and never influenced by offers.
Frequently asked questions
What is a good Hardpack setup for the Kove MX250 2025?
For a 75 kg Intermediate rider with a Neutral style, the Hardpack baseline for the Kove MX250 2025 at Caraglio shifts one of 6 computed settings away from the OEM standard. The biggest shifts: Rear sprocket 51 teeth (+1 vs OEM).
What gearing (sprockets) does the Kove MX250 2025 run?
As a starting point, 13 teeth front / 51 teeth rear. For more acceleration go larger at the rear (or smaller at the front); for more top speed, the reverse.
Are these values safe to ride?
Baseline values are starting points generated from OEM defaults, rider weight, skill, style and conditions - not safety guarantees. Verify on the bike, adjust step by step and ride within your limits.
Baseline values are starting points generated from OEM defaults, rider weight, skill, style, and condition - or lifted from an expert/verified setup where one exists (see the provenance badge). They are not safety guarantees. Verify on the bike and ride within your limits.