LAISASXV 550 2008 - Wet
Tuned for Circuit de Lohéac - adds: asphalt, technical
Aprilia SXV 550 2008 - 75 kg, Intermediate, Neutral, Wet - Circuit de Lohéac
Set this first
Fork: Compression
- Stock value
- 12 clicks
- Recommended
- 15 clicks
- Change
- 3 clicks softer than stock
clicks out from fully closed
Reason: condition Wet - Circuit de Lohéac
How to test it: Change Compression only, nothing else. Then ride the same section or the same number of laps as before and watch whether exactly the behaviour that bothers you changes. If it gets worse or less settled, put the value back.
- Fork: Compression15 clicks3 clicks softer than stockcomputed
- Shock: Low-speed compression15 clicks3 clicks softer than stockcomputed
- Fork: Rebound14 clicks2 clicks softer than stockcomputed
- Shock: Rebound14 clicks2 clicks softer than stockcomputed
- Tire: Rear tire pressure1.7 bar0.1 bar less than stockcomputed
17 confirmed settings available.
Computed from factory specs and your factors
Last reviewed: no release date - this starting value was computed, not measured.
A starting point to verify on the bike - not a safety guarantee. Change one thing at a time and check on track. How LAISA derives this →
All recommended changes
In order, biggest deviation from the stock value first. Take them one at a time.
- Fork: Compression3 clicks softer than stock
12 clicks15 clicksclicks out from fully closed
Reason: condition Wet - Circuit de Lohéac
How to test it
Change Compression only, nothing else. Then ride the same section or the same number of laps as before and watch whether exactly the behaviour that bothers you changes. If it gets worse or less settled, put the value back.
- Shock: Low-speed compression3 clicks softer than stock
12 clicks15 clicksclicks out from fully closed
Reason: condition Wet - Circuit de Lohéac
How to test it
Change Low-speed compression only, nothing else. Then ride the same section or the same number of laps as before and watch whether exactly the behaviour that bothers you changes. If it gets worse or less settled, put the value back.
- Fork: Rebound2 clicks softer than stock
12 clicks14 clicksclicks out from fully closed
Reason: condition Wet - Circuit de Lohéac
How to test it
Change Rebound only, nothing else. Then ride the same section or the same number of laps as before and watch whether exactly the behaviour that bothers you changes. If it gets worse or less settled, put the value back.
- Shock: Rebound2 clicks softer than stock
12 clicks14 clicksclicks out from fully closed
Reason: condition Wet - Circuit de Lohéac
How to test it
Change Rebound only, nothing else. Then ride the same section or the same number of laps as before and watch whether exactly the behaviour that bothers you changes. If it gets worse or less settled, put the value back.
- Tire: Rear tire pressure0.1 bar less than stock
1.8 bar1.7 bar
Reason: condition Wet - Circuit de Lohéac
How to test it
Change Rear tire pressure only, nothing else. Then ride the same section or the same number of laps as before and watch whether exactly the behaviour that bothers you changes. If it gets worse or less settled, put the value back.
- Tire: Front tire pressure0.1 bar less than stock
2 bar1.9 bar
Reason: condition Wet - Circuit de Lohéac
How to test it
Change Front tire pressure only, nothing else. Then ride the same section or the same number of laps as before and watch whether exactly the behaviour that bothers you changes. If it gets worse or less settled, put the value back.
- Shock: Spring rate2 N/mm less than stock
95 N/mm93 N/mm
Reason: condition Wet - Circuit de Lohéac
How to test it
Change Spring rate only, nothing else. Then ride the same section or the same number of laps as before and watch whether exactly the behaviour that bothers you changes. If it gets worse or less settled, put the value back.
- Fork: Spring rate0.1 N/mm less than stock
4.8 N/mm4.7 N/mm
Reason: condition Wet - Circuit de Lohéac
How to test it
Change Spring rate only, nothing else. Then ride the same section or the same number of laps as before and watch whether exactly the behaviour that bothers you changes. If it gets worse or less settled, put the value back.
All technical values
Complete settings, technical data, components, gearing and geometry - including the adjusters that exist on the bike but do not carry a confirmed value yet.
| BrakeBrembo Supermoto Radial 4-Piston Caliper | ||
| Brake lever position | 3 notch | OEM |
| ChainOEM Chain | ||
| Chain length | 114 links | OEM |
| ChassisOEM Frame | ||
| Fork height in clampstube protrusion above top clamp | 5 ring | OEM |
| ClutchOEM Wet Multiplate Clutch | ||
| ForkMarzocchi Shiver 45 mm USD Fork | ||
| Compressionclicks out from fully closed | 15 clicks▲ +3 | computed |
| Reboundclicks out from fully closed | 14 clicks▲ +2 | computed |
| Spring rate | 4.7 N/mm▼ -0.1 | computed |
| HandlebarOEM Handlebar | ||
| ShockSachs Piggyback Monoshock | ||
| Sagloaded, rider in gear | 28 mm | OEM |
| Static sagwithout load | 8 mm | OEM |
| High-speed compressionclicks out from fully closed | 1.5 turns | OEM |
| Low-speed compressionclicks out from fully closed | 15 clicks▲ +3 | computed |
| Reboundclicks out from fully closed | 14 clicks▲ +2 | computed |
| Spring rate | 93 N/mm▼ -2 | computed |
| SwingarmOEM Aluminium Swingarm | ||
| Rear Axle PostionOffset from middle of adjustment range | 0 mm | OEM |
| TireOEM Supermoto Tyres 17" | ||
| Front tire pressure | 1.9 bar (27.56 psi)▼ -0.1 | computed |
| Rear tire pressure | 1.7 bar (24.66 psi)▼ -0.1 | computed |
| TransmissionOEM Final Drive | ||
| Front sprocket | 16 teeth | OEM |
| Rear sprocket | 44 teeth | OEM |
After the ride
Tested a change? Record what happened. LAISA stores it against this bike and this condition. The recommendation above does not adapt to it automatically yet.
About this baseline
For a 75 kg Intermediate rider with a Neutral style, the Wet baseline for the Aprilia SXV 550 2008 at Circuit de Lohéac shifts 8 of 17 computed settings away from the OEM standard. The biggest shifts: Compression 15 clicks (+3 vs OEM), Low-speed compression 15 clicks (+3 vs OEM). All values are computed from OEM defaults and your rider and condition factors.
Value provenance: OEM = manufacturer specification · verified = confirmed by an expert · reviewed = editorially reviewed reference · community = confirmed by the community (median of at least three public setups) · computed = automatically derived by the LAISA engine. Automatically extracted and unconfirmed values never appear on public pages.
No public community setups yet for this bike and condition.
Doesn't feel right on track?
Pick the symptom and we'll show the likely setup causes - and whether it is really a technique thing.
Troubleshoot a handling problemMatching protective gear
The right setup is half the job - the other half is protective gear matched to the discipline and conditions.
Affiliate links - we may earn a commission at no extra cost to you. The recommendation is safety-first and never influenced by offers.
Frequently asked questions
What is a good Wet setup for the Aprilia SXV 550 2008?
For a 75 kg Intermediate rider with a Neutral style, the Wet baseline for the Aprilia SXV 550 2008 at Circuit de Lohéac shifts 8 of 17 computed settings away from the OEM standard. The biggest shifts: Compression 15 clicks (+3 vs OEM), Low-speed compression 15 clicks (+3 vs OEM).
How much race sag for the Aprilia SXV 550 2008?
As a starting point, 28 mm of race sag at 75 kg rider weight. Measure with a helper and set it via spring preload.
What tire pressure for the Aprilia SXV 550 2008 in Wet conditions?
As a starting point: 1.9 bar front, 1.7 bar rear - computed for a 75 kg Intermediate rider. Check cold and adjust in small steps by feel.
What gearing (sprockets) does the Aprilia SXV 550 2008 run?
As a starting point, 16 teeth front / 44 teeth rear. For more acceleration go larger at the rear (or smaller at the front); for more top speed, the reverse.
Are these values safe to ride?
Baseline values are starting points generated from OEM defaults, rider weight, skill, style and conditions - not safety guarantees. Verify on the bike, adjust step by step and ride within your limits.
Baseline values are starting points generated from OEM defaults, rider weight, skill, style, and condition - or lifted from an expert/verified setup where one exists (see the provenance badge). They are not safety guarantees. Verify on the bike and ride within your limits.