LAISAFC 250 2025
Track: Motocross Übungsanlage Lehmbek
← Back to Motocross Übungsanlage LehmbekTaken over from the track: Clay · dry
Husqvarna FC 250 2025 - 75 kg, Intermediate, Neutral, Motocross Übungsanlage Lehmbek
Set this first
Shock: High-speed compression
- Stock value
- 1.75 turns
- Recommended
- 2 turns
- Change
- 0.25 turns softer than stock
clicks out from fully closed
How to test it: Change High-speed compression only, nothing else. Then ride the same section or the same number of laps as before and watch whether exactly the behaviour that bothers you changes. If it gets worse or less settled, put the value back.
- Shock: High-speed compression2 turns0.25 turns softer than stockOEM
- Fork: Rebound10 clicks1 click softer than stockcomputed
- Shock: Low-speed compression11 clicks1 click softer than stockcomputed
- Shock: Rebound12 clicks1 click softer than stockcomputed
- Fork: Compression15 clicks1 click softer than stockcomputed
13 confirmed settings available.
Released reference setup, confirmed by an expert · Moderately documented
Referenced (not linked):- KTM/Husqvarna 250 SX-F / FC 250 2025 Owner's Manual - WP XACT suspension, EU Standard settings (Art.no 3240043en) (2025)
- FC 250 stock gearing from 2025 Husqvarna FC 250 specifications (2025)
- tyre pressure FC 250 offroad standard
Last reviewed: 29 Jul 2026
A starting point to verify on the bike - not a safety guarantee. Change one thing at a time and check on track. How LAISA derives this →
All recommended changes
In order, biggest deviation from the stock value first. Take them one at a time.
- Shock: High-speed compression0.25 turns softer than stock
1.75 turns2 turnsclicks out from fully closed
How to test it
Change High-speed compression only, nothing else. Then ride the same section or the same number of laps as before and watch whether exactly the behaviour that bothers you changes. If it gets worse or less settled, put the value back.
- Fork: Rebound1 click softer than stock
9 clicks10 clicksclicks out from fully closed
Reason: condition Motocross Übungsanlage Lehmbek
How to test it
Change Rebound only, nothing else. Then ride the same section or the same number of laps as before and watch whether exactly the behaviour that bothers you changes. If it gets worse or less settled, put the value back.
- Shock: Low-speed compression1 click softer than stock
10 clicks11 clicksclicks out from fully closed
Reason: condition Motocross Übungsanlage Lehmbek
How to test it
Change Low-speed compression only, nothing else. Then ride the same section or the same number of laps as before and watch whether exactly the behaviour that bothers you changes. If it gets worse or less settled, put the value back.
- Shock: Rebound1 click softer than stock
11 clicks12 clicksclicks out from fully closed
Reason: condition Motocross Übungsanlage Lehmbek
How to test it
Change Rebound only, nothing else. Then ride the same section or the same number of laps as before and watch whether exactly the behaviour that bothers you changes. If it gets worse or less settled, put the value back.
- Fork: Compression1 click softer than stock
14 clicks15 clicksclicks out from fully closed
Reason: condition Motocross Übungsanlage Lehmbek
How to test it
Change Compression only, nothing else. Then ride the same section or the same number of laps as before and watch whether exactly the behaviour that bothers you changes. If it gets worse or less settled, put the value back.
- Tire: Front tire pressure0.05 bar more than stock
1 bar1.05 bar
Reason: condition Motocross Übungsanlage Lehmbek
How to test it
Change Front tire pressure only, nothing else. Then ride the same section or the same number of laps as before and watch whether exactly the behaviour that bothers you changes. If it gets worse or less settled, put the value back.
- Tire: Rear tire pressure0.05 bar more than stock
1 bar1.05 bar
Reason: condition Motocross Übungsanlage Lehmbek
How to test it
Change Rear tire pressure only, nothing else. Then ride the same section or the same number of laps as before and watch whether exactly the behaviour that bothers you changes. If it gets worse or less settled, put the value back.
All technical values
Complete settings, technical data, components, gearing and geometry - including the adjusters that exist on the bike but do not carry a confirmed value yet.
| BrakeBrembo Hydraulic Disc Brakes (260/220 mm) | ||
| ChainOEM Chain | ||
| ChassisOEM Chromoly Steel Frame | ||
| Fork height in clampstube protrusion above top clamp | 5 ring | OEM |
| ClutchOEM DDS Wet Multiplate Clutch | ||
| ECUKeihin EMS | ||
| ForkWP XACT 48mm AER Fork | ||
| Compressionclicks out from fully closed | 15 clicks▲ +1 | computed |
| Reboundclicks out from fully closed | 10 clicks▲ +1 | computed |
| Air pressure | 10.7 bar (155.19 psi) | OEM |
| HandlebarOEM Handlebar | ||
| ShockWP XACT Monoshock | ||
| Sagloaded, rider in gear | 102 mm | OEM |
| High-speed compressionclicks out from fully closed | 2 turns | OEM |
| Low-speed compressionclicks out from fully closed | 11 clicks▲ +1 | computed |
| Reboundclicks out from fully closed | 12 clicks▲ +1 | computed |
| Spring rate | 42 N/mm | OEM |
| SwingarmOEM Aluminium Swingarm | ||
| TireDunlop Geomax MX34 | ||
| Front tire pressure | 1.05 bar (15.23 psi)▲ +0.05 | computed |
| Rear tire pressure | 1.05 bar (15.23 psi)▲ +0.05 | computed |
| TransmissionOEM Final Drive | ||
| Front sprocket | 13 teeth | OEM |
| Rear sprocket | 51 teeth | OEM |
| Triple ClampOEM CNC Triple Clamp | ||
After the ride
Tested a change? Record what happened. LAISA stores it against this bike and this condition. The recommendation above does not adapt to it automatically yet.
About this baseline
For a 75 kg Intermediate rider with a Neutral style, the baseline for the Husqvarna FC 250 2025 at Motocross Übungsanlage Lehmbek shifts 7 of 13 computed settings away from the OEM standard. The biggest shifts: High-speed compression 2 turns (+0,25 vs OEM), Rebound 10 clicks (+1 vs OEM). All values are computed from OEM defaults and your rider and condition factors.
Value provenance: OEM = manufacturer specification · verified = confirmed by an expert · reviewed = editorially reviewed reference · community = confirmed by the community (median of at least three public setups) · computed = automatically derived by the LAISA engine. Automatically extracted and unconfirmed values never appear on public pages.
Next steps
Dial in your riding technique
Skills that change how the bike behaves - often the real fix before any clicker.
Explore techniqueMatching protective gear
The right setup is half the job - the other half is protective gear matched to the discipline and conditions.
Gear for these conditionsUpgrades that fit
Optional aftermarket parts for this bike - the setup above comes first, these are next.
Setups for this bike
1 setupsReference setups
Verified factory and expert setups.Related
Similar bikes
Matching tracks
Frequently asked questions
How much race sag for the Husqvarna FC 250 2025?
As a starting point, 102 mm of race sag at 75 kg rider weight. Measure with a helper and set it via spring preload.
What tire pressure is recommended for the Husqvarna FC 250 2025?
As a starting point: 1.05 bar front, 1.05 bar rear - computed for a 75 kg Intermediate rider. Check cold and adjust in small steps by feel.
What gearing (sprockets) does the Husqvarna FC 250 2025 run?
As a starting point, 13 teeth front / 51 teeth rear. For more acceleration go larger at the rear (or smaller at the front); for more top speed, the reverse.
Are these values safe to ride?
Baseline values are starting points generated from OEM defaults, rider weight, skill, style and conditions - not safety guarantees. Verify on the bike, adjust step by step and ride within your limits.
Baseline values are starting points generated from OEM defaults, rider weight, skill, style, and condition - or lifted from an expert/verified setup where one exists (see the provenance badge). They are not safety guarantees. Verify on the bike and ride within your limits.