LAISATF 250-X 2025
Track: 3 Palms Action Sports Park
← Back to 3 Palms Action Sports ParkTaken over from the track: Sand · dry
Triumph TF 250-X 2025 - 75 kg, Intermediate, Neutral, 3 Palms Action Sports Park
Set this first
Fork: Spring rate
- Stock value
- 4.7 N/mm
- Recommended
- 4.8 N/mm
- Change
- 0.1 N/mm more than stock
Reason: condition 3 Palms Action Sports Park
How to test it: Change Spring rate only, nothing else. Then ride the same section or the same number of laps as before and watch whether exactly the behaviour that bothers you changes. If it gets worse or less settled, put the value back.
- Fork: Spring rate4.8 N/mm0.1 N/mm more than stockcomputed
- Shock: Spring rate57 N/mm1 N/mm more than stockcomputed
- Transmission: Front sprocket13 teethOEM
- Transmission: Rear sprocket48 teethOEM
5 confirmed settings available.
Computed from factory specs and your factors
Last reviewed: no release date - this starting value was computed, not measured.
A starting point to verify on the bike - not a safety guarantee. Change one thing at a time and check on track. How LAISA derives this →
All recommended changes
In order, biggest deviation from the stock value first. Take them one at a time.
- Fork: Spring rate0.1 N/mm more than stock
4.7 N/mm4.8 N/mm
Reason: condition 3 Palms Action Sports Park
How to test it
Change Spring rate only, nothing else. Then ride the same section or the same number of laps as before and watch whether exactly the behaviour that bothers you changes. If it gets worse or less settled, put the value back.
- Shock: Spring rate1 N/mm more than stock
56 N/mm57 N/mm
Reason: condition 3 Palms Action Sports Park
How to test it
Change Spring rate only, nothing else. Then ride the same section or the same number of laps as before and watch whether exactly the behaviour that bothers you changes. If it gets worse or less settled, put the value back.
All technical values
Complete settings, technical data, components, gearing and geometry - including the adjusters that exist on the bike but do not carry a confirmed value yet.
| BrakeBrembo Hydraulic Disc Brakes (260/220 mm) | ||
| ChainOEM Chain | ||
| ChassisOEM Aluminium Spine Frame (TF 250-X) | ||
| ClutchOEM Wet Multiplate Clutch | ||
| ECUOEM Engine Management | ||
| ForkKYB 48 mm AOS Coil-Spring Fork | ||
| Spring rate | 4.8 N/mm▲ +0.1 | computed |
| HandlebarOEM Handlebar | ||
| ShockKYB Piggyback Coil Shock | ||
| Spring rate | 57 N/mm▲ +1 | computed |
| SwingarmOEM Aluminium Swingarm | ||
| TirePirelli Scorpion MX32 | ||
| Compound | soft | OEM |
| TransmissionOEM Final Drive | ||
| Front sprocket | 13 teeth | OEM |
| Rear sprocket | 48 teeth | OEM |
After the ride
Tested a change? Record what happened. LAISA stores it against this bike and this condition. The recommendation above does not adapt to it automatically yet.
About this baseline
For a 75 kg Intermediate rider with a Neutral style, the baseline for the Triumph TF 250-X 2025 at 3 Palms Action Sports Park shifts 2 of 5 computed settings away from the OEM standard. The biggest shifts: Spring rate 4.8 N/mm (+0,1 vs OEM), Spring rate 57 N/mm (+1 vs OEM). All values are computed from OEM defaults and your rider and condition factors.
Value provenance: OEM = manufacturer specification · verified = confirmed by an expert · reviewed = editorially reviewed reference · community = confirmed by the community (median of at least three public setups) · computed = automatically derived by the LAISA engine. Automatically extracted and unconfirmed values never appear on public pages.
Next steps
Dial in your riding technique
Skills that change how the bike behaves - often the real fix before any clicker.
Explore techniqueMatching protective gear
The right setup is half the job - the other half is protective gear matched to the discipline and conditions.
Gear for these conditionsUpgrades that fit
Optional aftermarket parts for this bike - the setup above comes first, these are next.
Related
Similar bikes
Matching tracks
Frequently asked questions
What gearing (sprockets) does the Triumph TF 250-X 2025 run?
As a starting point, 13 teeth front / 48 teeth rear. For more acceleration go larger at the rear (or smaller at the front); for more top speed, the reverse.
Are these values safe to ride?
Baseline values are starting points generated from OEM defaults, rider weight, skill, style and conditions - not safety guarantees. Verify on the bike, adjust step by step and ride within your limits.
Baseline values are starting points generated from OEM defaults, rider weight, skill, style, and condition - or lifted from an expert/verified setup where one exists (see the provenance badge). They are not safety guarantees. Verify on the bike and ride within your limits.