TRIONLAISA
All bikes
Suzuki

RM-Z250 2024

Track: Complexo Voltas e Rodas - Lustosa

Back to Complexo Voltas e Rodas - LustosaTaken over from the track: Hardpack · Off-camber · Jumps · Technical · dry

Suzuki RM-Z250 2024 - 75 kg, Intermediate, Neutral, Complexo Voltas e Rodas - Lustosa

Set this first

Most important change

Fork: Rebound

Stock value
14 clicks
Recommended
16 clicks
Change
2 clicks softer than stock

clicks out from fully closed

Reason: condition Complexo Voltas e Rodas - Lustosa

How to test it: Change Rebound only, nothing else. Then ride the same section or the same number of laps as before and watch whether exactly the behaviour that bothers you changes. If it gets worse or less settled, put the value back.

Key values

12 confirmed settings available.

Source

Released reference setup, confirmed by an expert · Moderately documented

Referenced (not linked):
  • Suzuki RM-Z250 MY2024 Owner's Manual, P/N 99011-46K55-01A (2024)

Last reviewed: 29 Jul 2026

All recommended changes

In order, biggest deviation from the stock value first. Take them one at a time.

  1. Fork: Rebound2 clicks softer than stock

    14 clicks16 clicksclicks out from fully closed

    Reason: condition Complexo Voltas e Rodas - Lustosa

    How to test it

    Change Rebound only, nothing else. Then ride the same section or the same number of laps as before and watch whether exactly the behaviour that bothers you changes. If it gets worse or less settled, put the value back.

  2. Shock: Rebound2 clicks softer than stock

    14 clicks16 clicksclicks out from fully closed

    Reason: condition Complexo Voltas e Rodas - Lustosa

    How to test it

    Change Rebound only, nothing else. Then ride the same section or the same number of laps as before and watch whether exactly the behaviour that bothers you changes. If it gets worse or less settled, put the value back.

  3. Tire: Rear tire pressure0.1 bar more than stock

    0.9 bar1 bar

    Reason: condition Complexo Voltas e Rodas - Lustosa

    How to test it

    Change Rear tire pressure only, nothing else. Then ride the same section or the same number of laps as before and watch whether exactly the behaviour that bothers you changes. If it gets worse or less settled, put the value back.

  4. Fork: Compression1 click harder than stock

    11 clicks10 clicksclicks out from fully closed

    Reason: condition Complexo Voltas e Rodas - Lustosa

    How to test it

    Change Compression only, nothing else. Then ride the same section or the same number of laps as before and watch whether exactly the behaviour that bothers you changes. If it gets worse or less settled, put the value back.

  5. Shock: High-speed compression1 click harder than stock

    14 clicks13 clicksclicks out from fully closed

    How to test it

    Change High-speed compression only, nothing else. Then ride the same section or the same number of laps as before and watch whether exactly the behaviour that bothers you changes. If it gets worse or less settled, put the value back.

  6. Shock: Low-speed compression1 click harder than stock

    14 clicks13 clicksclicks out from fully closed

    Reason: condition Complexo Voltas e Rodas - Lustosa

    How to test it

    Change Low-speed compression only, nothing else. Then ride the same section or the same number of laps as before and watch whether exactly the behaviour that bothers you changes. If it gets worse or less settled, put the value back.

  7. Tire: Front tire pressure0.05 bar more than stock

    0.9 bar0.95 bar

    Reason: condition Complexo Voltas e Rodas - Lustosa

    How to test it

    Change Front tire pressure only, nothing else. Then ride the same section or the same number of laps as before and watch whether exactly the behaviour that bothers you changes. If it gets worse or less settled, put the value back.

All technical values

Complete settings, technical data, components, gearing and geometry - including the adjusters that exist on the bike but do not carry a confirmed value yet.

12 confirmed values
BrakeNissin Hydraulic Disc Brakes
ChainOEM Chain
Chain length114 linksOEM
ChassisOEM Aluminium Twin-Spar Frame
ClutchOEM Wet Multiplate Clutch
ECUOEM Engine Management
ForkKYB 49 mm Coil-Spring Fork
Compressionclicks out from fully closed10 clicks -1computed
Oil heightfrom top, fully compressed, no spring388 mlOEM
Reboundclicks out from fully closed16 clicks +2computed
HandlebarOEM Handlebar
ShockKYB Link-Type MX Monoshock
High-speed compressionclicks out from fully closed13 clicks -1computed
Low-speed compressionclicks out from fully closed13 clicks -1computed
Reboundclicks out from fully closed16 clicks +2computed
High-speed reboundclicks out from fully closed16 clicksOEM
SwingarmOEM Aluminium Swingarm
TireDunlop Geomax MX33
Front tire pressure0.95 bar (13.78 psi) +0.05computed
Rear tire pressure1 bar (14.5 psi) +0.1computed
TransmissionOEM Final Drive
Front sprocket13 teethOEM
Rear sprocket50 teethOEM

After the ride

Tested a change? Record what happened. LAISA stores it against this bike and this condition. The recommendation above does not adapt to it automatically yet.

About this baseline

For a 75 kg Intermediate rider with a Neutral style, the baseline for the Suzuki RM-Z250 2024 at Complexo Voltas e Rodas - Lustosa shifts 7 of 12 computed settings away from the OEM standard. The biggest shifts: Rebound 16 clicks (+2 vs OEM), Rebound 16 clicks (+2 vs OEM). All values are computed from OEM defaults and your rider and condition factors.

Value provenance: OEM = manufacturer specification · verified = confirmed by an expert · reviewed = editorially reviewed reference · community = confirmed by the community (median of at least three public setups) · computed = automatically derived by the LAISA engine. Automatically extracted and unconfirmed values never appear on public pages.

Next steps

Dial in your riding technique

Skills that change how the bike behaves - often the real fix before any clicker.

Explore technique

Matching protective gear

The right setup is half the job - the other half is protective gear matched to the discipline and conditions.

Gear for these conditions

Upgrades that fit

Optional aftermarket parts for this bike - the setup above comes first, these are next.

Shockfits
Moose Racing Moose Racing Umlenkungs-Kit
Tirelikely fit
Bridgestone Bridgestone M203 ( 70/100-17 TT 40M M/C, NHS, Vorderrad )
Exhaustlikely fit
Akrapovic Evolution Line
Forklikely fit
SPV2 Factory Fork Upgrade
See more parts that fit
Set it up like a pro

Get it professionally dialed in - find a coach or a track day.

Find coaching

Setups for this bike

1 setups

Reference setups

Verified factory and expert setups.
ReferenceOEM Factory Baseline - Suzuki RM-Z250 2024AI
SandClayMudRaceTrainingHardpack
Chain length114 links
Compressionclicks out from fully closed11 clicks
Oil heightfork oil QUANTITY per leg in ml (Suzuki specifies volume, not level); std 388 ml, adjustment range 319-408 ml - unit pinned to ml via per-bike override 2026-07-10388 mm
Reboundclicks out from fully closed13 clicks
Spring rate5 N/mm
Front sprocket13 teeth
Rear sprocket50 teeth
Sagloaded, rider in gear110 mm
High-speed compressionclicks out from fully closed14 clicks
Low-speed compressionclicks out from fully closed14 clicks
Preload3 mm
Reboundclicks out from fully closed14 clicks
High-speed reboundclicks out from fully closed16 clicks
Spring rate52 N/mm
Front tire pressure0.7–1.1 bar
Rear tire pressure0.7–1.1 bar

Related

Similar bikes

Husqvarna FC 450 2024Kawasaki KX450F 2018KTM SX 250 2023KTM SX 250 2024Yamaha YZ 125 2025KTM 125 SX 2025KTM 250 SX-F 2013KTM 350 SX-F 2025

Matching tracks

1. RMC Reutlingen (Markwasen) (Baden-Württemberg)3 Palms Action Sports Park (Texas)5 Points MX Park (North Carolina)800 MX (Kentucky)AC Kronach (Bayern)ADAC OWL Enduro/MX Trainingsgelände (Nordrhein-Westfalen)AMC Bad Windsheim (Bayern)AMC Birkenfeld Motocross (Rheinland-Pfalz)

Comparisons

vs Husqvarna FC 450 2024vs Kawasaki KX450F 2018vs KTM SX 250 2023vs KTM SX 250 2024vs Yamaha YZ 125 2025vs KTM 125 SX 2025

Frequently asked questions

What tire pressure is recommended for the Suzuki RM-Z250 2024?

As a starting point: 0.95 bar front, 1 bar rear - computed for a 75 kg Intermediate rider. Check cold and adjust in small steps by feel.

What gearing (sprockets) does the Suzuki RM-Z250 2024 run?

As a starting point, 13 teeth front / 50 teeth rear. For more acceleration go larger at the rear (or smaller at the front); for more top speed, the reverse.

Are these values safe to ride?

Baseline values are starting points generated from OEM defaults, rider weight, skill, style and conditions - not safety guarantees. Verify on the bike, adjust step by step and ride within your limits.

Baseline values are starting points generated from OEM defaults, rider weight, skill, style, and condition - or lifted from an expert/verified setup where one exists (see the provenance badge). They are not safety guarantees. Verify on the bike and ride within your limits.

Ratings & reviews

No reviews yet - be the first.
Write a review