LAISACRF250R 2010
Track: MC Schwedt
← Back to MC SchwedtTaken over from the track: Sand · Jumps · dry
Honda CRF250R 2010 - 75 kg, Intermediate, Neutral, MC Schwedt
Set this first
Fork: Compression
- Stock value
- 13 clicks
- Recommended
- 9 clicks
- Change
- 4 clicks harder than stock
clicks out from fully closed
Reason: condition MC Schwedt
How to test it: Change Compression only, nothing else. Then ride the same section or the same number of laps as before and watch whether exactly the behaviour that bothers you changes. If it gets worse or less settled, put the value back.
- Fork: Compression9 clicks4 clicks harder than stockcomputed
- Tire: Front tire pressure0.9 bar0.1 bar less than stockcomputed
- Tire: Rear tire pressure0.9 bar0.1 bar less than stockcomputed
- Shock: Sag105 mm5 mm more than stockcomputed
- Fork: Spring rate4.5 N/mm0.1 N/mm more than stockcomputed
11 confirmed settings available.
Released reference setup, confirmed by an expert
One released reference records no document.
Last reviewed: 29 Jul 2026
A starting point to verify on the bike - not a safety guarantee. Change one thing at a time and check on track. How LAISA derives this →
All recommended changes
In order, biggest deviation from the stock value first. Take them one at a time.
- Fork: Compression4 clicks harder than stock
13 clicks9 clicksclicks out from fully closed
Reason: condition MC Schwedt
How to test it
Change Compression only, nothing else. Then ride the same section or the same number of laps as before and watch whether exactly the behaviour that bothers you changes. If it gets worse or less settled, put the value back.
- Tire: Front tire pressure0.1 bar less than stock
1 bar0.9 bar
Reason: condition MC Schwedt
How to test it
Change Front tire pressure only, nothing else. Then ride the same section or the same number of laps as before and watch whether exactly the behaviour that bothers you changes. If it gets worse or less settled, put the value back.
- Tire: Rear tire pressure0.1 bar less than stock
1 bar0.9 bar
Reason: condition MC Schwedt
How to test it
Change Rear tire pressure only, nothing else. Then ride the same section or the same number of laps as before and watch whether exactly the behaviour that bothers you changes. If it gets worse or less settled, put the value back.
- Shock: Sag5 mm more than stock
100 mm105 mmloaded, rider in gear
Reason: condition MC Schwedt
How to test it
Change Sag only, nothing else. Then ride the same section or the same number of laps as before and watch whether exactly the behaviour that bothers you changes. If it gets worse or less settled, put the value back.
- Fork: Spring rate0.1 N/mm more than stock
4.4 N/mm4.5 N/mm
Reason: condition MC Schwedt
How to test it
Change Spring rate only, nothing else. Then ride the same section or the same number of laps as before and watch whether exactly the behaviour that bothers you changes. If it gets worse or less settled, put the value back.
- Shock: Spring rate1 N/mm more than stock
52 N/mm53 N/mm
Reason: condition MC Schwedt
How to test it
Change Spring rate only, nothing else. Then ride the same section or the same number of laps as before and watch whether exactly the behaviour that bothers you changes. If it gets worse or less settled, put the value back.
All technical values
Complete settings, technical data, components, gearing and geometry - including the adjusters that exist on the bike but do not carry a confirmed value yet.
| BrakeNissin Hydraulic Disc Brakes | ||
| ChainOEM Chain | ||
| Chain length | 116 links | OEM |
| ChassisOEM Aluminium Twin-Spar Frame (Honda MX 2007-2012) | ||
| ClutchOEM Wet Multiplate Clutch | ||
| ECUOEM Engine Management | ||
| ForkShowa Twin-Chamber Cartridge Fork | ||
| Compressionclicks out from fully closed | 9 clicks▼ -4 | computed |
| Reboundclicks out from fully closed | 8 clicks | computed |
| Spring rate | 4.5 N/mm▲ +0.1 | computed |
| HandlebarOEM Handlebar | ||
| ShockShowa MX Monoshock | ||
| Sagloaded, rider in gear | 105 mm▲ +5 | computed |
| Reboundclicks out from fully closed | 11 clicks | computed |
| Spring rate | 53 N/mm▲ +1 | computed |
| SwingarmOEM Aluminium Swingarm | ||
| TireDunlop Geomax D742/D756 | ||
| Front tire pressure | 0.9 bar (13.05 psi)▼ -0.1 | computed |
| Rear tire pressure | 0.9 bar (13.05 psi)▼ -0.1 | computed |
| TransmissionOEM Final Drive | ||
| Front sprocket | 13 teeth | OEM |
| Rear sprocket | 49 teeth | OEM |
After the ride
Tested a change? Record what happened. LAISA stores it against this bike and this condition. The recommendation above does not adapt to it automatically yet.
About this baseline
For a 75 kg Intermediate rider with a Neutral style, the baseline for the Honda CRF250R 2010 at MC Schwedt shifts 6 of 11 computed settings away from the OEM standard. The biggest shifts: Compression 9 clicks (-4 vs OEM), Front tire pressure 0.9 bar (-0,1 vs OEM). All values are computed from OEM defaults and your rider and condition factors.
Value provenance: OEM = manufacturer specification · verified = confirmed by an expert · reviewed = editorially reviewed reference · community = confirmed by the community (median of at least three public setups) · computed = automatically derived by the LAISA engine. Automatically extracted and unconfirmed values never appear on public pages.
Next steps
Dial in your riding technique
Skills that change how the bike behaves - often the real fix before any clicker.
Explore techniqueMatching protective gear
The right setup is half the job - the other half is protective gear matched to the discipline and conditions.
Gear for these conditionsUpgrades that fit
Optional aftermarket parts for this bike - the setup above comes first, these are next.
Setups for this bike
1 setupsReference setups
Verified factory and expert setups.Related
Similar bikes
Matching tracks
Frequently asked questions
How much race sag for the Honda CRF250R 2010?
As a starting point, 105 mm of race sag at 75 kg rider weight. Measure with a helper and set it via spring preload.
What tire pressure is recommended for the Honda CRF250R 2010?
As a starting point: 0.9 bar front, 0.9 bar rear - computed for a 75 kg Intermediate rider. Check cold and adjust in small steps by feel.
What gearing (sprockets) does the Honda CRF250R 2010 run?
As a starting point, 13 teeth front / 49 teeth rear. For more acceleration go larger at the rear (or smaller at the front); for more top speed, the reverse.
Are these values safe to ride?
Baseline values are starting points generated from OEM defaults, rider weight, skill, style and conditions - not safety guarantees. Verify on the bike, adjust step by step and ride within your limits.
Baseline values are starting points generated from OEM defaults, rider weight, skill, style, and condition - or lifted from an expert/verified setup where one exists (see the provenance badge). They are not safety guarantees. Verify on the bike and ride within your limits.