LAISADesmo450 MX 2026
Track: EMX-Park Laßnitzthal
← Back to EMX-Park LaßnitzthalTaken over from the track: Loam · Technical · Tight · Jumps · dry
Ducati Desmo450 MX 2026 - 75 kg, Intermediate, Neutral, EMX-Park Laßnitzthal
Set this first
Shock: Rebound
- Stock value
- 9 clicks
- Recommended
- 11 clicks
- Change
- 2 clicks softer than stock
clicks out from fully closed
Reason: condition EMX-Park Laßnitzthal
How to test it: Change Rebound only, nothing else. Then ride the same section or the same number of laps as before and watch whether exactly the behaviour that bothers you changes. If it gets worse or less settled, put the value back.
- Shock: Rebound11 clicks2 clicks softer than stockcomputed
- Fork: Rebound12 clicks2 clicks softer than stockcomputed
- Shock: High-speed compression2 turns0.5 turns harder than stockcomputed
- Fork: Compression10 clicks1 click harder than stockcomputed
- Shock: Low-speed compression12 clicks1 click harder than stockcomputed
16 confirmed settings available.
Released reference setup, confirmed by an expert · Well documented
Referenced (not linked):- Ducati Desmo450 MX Owner's Manual EN 2026 ED02 (fork/shock adjustment tables p.76-79, sag/preload p.79, technical data p.17) - downloads.ctfassets.net/.../OM_-_Desmo450_MX_-_EN_-_26_-_ED02.pdf (2026)
Last reviewed: 29 Jul 2026
A starting point to verify on the bike - not a safety guarantee. Change one thing at a time and check on track. How LAISA derives this →
All recommended changes
In order, biggest deviation from the stock value first. Take them one at a time.
- Shock: Rebound2 clicks softer than stock
9 clicks11 clicksclicks out from fully closed
Reason: condition EMX-Park Laßnitzthal
How to test it
Change Rebound only, nothing else. Then ride the same section or the same number of laps as before and watch whether exactly the behaviour that bothers you changes. If it gets worse or less settled, put the value back.
- Fork: Rebound2 clicks softer than stock
10 clicks12 clicksclicks out from fully closed
Reason: condition EMX-Park Laßnitzthal
How to test it
Change Rebound only, nothing else. Then ride the same section or the same number of laps as before and watch whether exactly the behaviour that bothers you changes. If it gets worse or less settled, put the value back.
- Shock: High-speed compression0.5 turns harder than stock
2.5 turns2 turnsclicks out from fully closed
How to test it
Change High-speed compression only, nothing else. Then ride the same section or the same number of laps as before and watch whether exactly the behaviour that bothers you changes. If it gets worse or less settled, put the value back.
- Fork: Compression1 click harder than stock
11 clicks10 clicksclicks out from fully closed
Reason: condition EMX-Park Laßnitzthal
How to test it
Change Compression only, nothing else. Then ride the same section or the same number of laps as before and watch whether exactly the behaviour that bothers you changes. If it gets worse or less settled, put the value back.
- Shock: Low-speed compression1 click harder than stock
13 clicks12 clicksclicks out from fully closed
Reason: condition EMX-Park Laßnitzthal
How to test it
Change Low-speed compression only, nothing else. Then ride the same section or the same number of laps as before and watch whether exactly the behaviour that bothers you changes. If it gets worse or less settled, put the value back.
- Transmission: Rear sprocket1 tooth more than stock
49 teeth50 teeth
Reason: condition EMX-Park Laßnitzthal
How to test it
Change Rear sprocket only, nothing else. Then ride the same section or the same number of laps as before and watch whether exactly the behaviour that bothers you changes. If it gets worse or less settled, put the value back.
All technical values
Complete settings, technical data, components, gearing and geometry - including the adjusters that exist on the bike but do not carry a confirmed value yet.
| BrakeBrembo Hydraulic Disc Brakes (260/220 mm) | ||
| ChainOEM Chain | ||
| Chain length | 116 links | OEM |
| ChassisOEM Aluminium Perimeter Frame (Desmo450) | ||
| Fork height in clampstube protrusion above top clamp | 5 mm | OEM |
| ClutchOEM Wet Multiplate Clutch | ||
| ECUOEM Engine Management | ||
| ForkShowa 49 mm Coil-Spring Fork | ||
| Compressionclicks out from fully closed | 10 clicks▼ -1 | computed |
| Reboundclicks out from fully closed | 12 clicks▲ +2 | computed |
| Spring rate | 5 N/mm | OEM |
| HandlebarOEM Handlebar | ||
| ShockShowa MX Monoshock | ||
| Sagloaded, rider in gear | 110 mm | OEM |
| Static sagwithout load | 40 mm | OEM |
| High-speed compressionclicks out from fully closed | 2 turns▼ -0.5 | computed |
| Low-speed compressionclicks out from fully closed | 12 clicks▼ -1 | computed |
| Preload | 8 mm | OEM |
| Reboundclicks out from fully closed | 11 clicks▲ +2 | computed |
| Spring rate | 46 N/mm | OEM |
| SwingarmOEM Aluminium Swingarm | ||
| TirePirelli Scorpion MX32 | ||
| Front tire pressure | 1 bar (14.5 psi) | OEM |
| Rear tire pressure | 1 bar (14.5 psi) | OEM |
| TransmissionOEM Final Drive | ||
| Front sprocket | 13 teeth | OEM |
| Rear sprocket | 50 teeth▲ +1 | computed |
After the ride
Tested a change? Record what happened. LAISA stores it against this bike and this condition. The recommendation above does not adapt to it automatically yet.
About this baseline
For a 75 kg Intermediate rider with a Neutral style, the baseline for the Ducati Desmo450 MX 2026 at EMX-Park Laßnitzthal shifts 6 of 16 computed settings away from the OEM standard. The biggest shifts: Rebound 11 clicks (+2 vs OEM), Rebound 12 clicks (+2 vs OEM). All values are computed from OEM defaults and your rider and condition factors.
Value provenance: OEM = manufacturer specification · verified = confirmed by an expert · reviewed = editorially reviewed reference · community = confirmed by the community (median of at least three public setups) · computed = automatically derived by the LAISA engine. Automatically extracted and unconfirmed values never appear on public pages.
Next steps
Dial in your riding technique
Skills that change how the bike behaves - often the real fix before any clicker.
Explore techniqueMatching protective gear
The right setup is half the job - the other half is protective gear matched to the discipline and conditions.
Gear for these conditionsUpgrades that fit
Optional aftermarket parts for this bike - the setup above comes first, these are next.
Setups for this bike
1 setupsReference setups
Verified factory and expert setups.Related
Similar bikes
Matching tracks
Frequently asked questions
How much race sag for the Ducati Desmo450 MX 2026?
As a starting point, 110 mm of race sag at 75 kg rider weight. Measure with a helper and set it via spring preload.
What tire pressure is recommended for the Ducati Desmo450 MX 2026?
As a starting point: 1 bar front, 1 bar rear - computed for a 75 kg Intermediate rider. Check cold and adjust in small steps by feel.
What gearing (sprockets) does the Ducati Desmo450 MX 2026 run?
As a starting point, 13 teeth front / 50 teeth rear. For more acceleration go larger at the rear (or smaller at the front); for more top speed, the reverse.
Are these values safe to ride?
Baseline values are starting points generated from OEM defaults, rider weight, skill, style and conditions - not safety guarantees. Verify on the bike, adjust step by step and ride within your limits.
Baseline values are starting points generated from OEM defaults, rider weight, skill, style, and condition - or lifted from an expert/verified setup where one exists (see the provenance badge). They are not safety guarantees. Verify on the bike and ride within your limits.